This adapter mounts a Wolfbox G90 style camera into any existing Baja Designs S1 or S2 flush mount light pod hole (common to light bars, horizontal/vertical tube mounts, universal a-pillar mounts, etc.) Perfect for off-road trucks, Jeeps, UTVs, and custom builds wanting integrated, durable fulltime digital rearview camera placement without new drilling.

● Includes stainless fasteners and dual o-rings for water/dust sealing
● Direct drop-in fit for S1/S2 pod openings
● Ideal for offroad enthusiasts adding front-facing or rock-crawl visibility
● Camera not included (compatible with Wolfbox G900 type camera bodies)
● Hardware: All stainless screws + o-rings included
● Professionally printed in weather-resistant ASA filament
● Designed and made in the USA by Americans

FITS WolfBox G840, G850 style Camera (match the photos)
The Crossroads 3D Camera mount is precision-designed for the Wolfbox G840, G850 style camera (not included.)

10-degree down angle is a screw mount designed for the Ford Transit High Roof, and has a wire exit underneath the bottom that goes straight down (intended to mount over top of a drilled hole.)

• Mount your Wolfbox camera to any flat surface
• Choose mount type: Screws or automotive molding tape (clean surface before use)
• Mount is precision fit: includes integrated wire channel to run the cord out the back
• Fits the Wolfbox G840, G850 rear camera only.
• Screws and/or tape included
• Designed and Made in the USA by Americans
• Professionally printed in ASA

Wolfbox G900 Rear Camera High-Mount Pod - 12° degree Down Angle, Sleek Weather Cover

Mount your Wolfbox rear camera high up on flat surfaces like camper roofs, trailer tops, or high-roof van exteriors with this angled adhesive pod. The built-in 12-degree downward tilt provides optimal rear viewing without awkward adjustments—perfect for elevated installations where a level mount would point too high.

• Designed for Wolfbox G900, G900 Pro, G900 Tripro, and similar rear camera models (check photos for match)
• 12° built-in down angle ideal for high placements on campers, travel trailers, fifth wheels, or roof-mounted setups
• Sleek protective cover shields the camera from rain, dust, UV, and road debris for reliable all-weather performance
• Choose from stainless screw or automotive-grade adhesive mounting for secure mounting on metal, fiberglass, or composite surfaces
• Wire exit options: choose bottom cable exit or rear exit when ordering
• Durable, weather-resistant construction holds up in outdoor vehicle environments
• Easy install: snap in camera, install base plate, and install. (Camera NOT included – mount and cover only)
• Proudly designed and made in the USA by Americans

Great for high-roof cargo vans like Ford Transit (including high-roof models), Mercedes-Benz Sprinter (high-roof), Ram ProMaster (high-roof), and similar setups where you need downward-angled rear visibility from elevated positions.

Not sure if it fits your setup? Message me with your vehicle details or a photo—I'll confirm compatibility fast!

[FITS: "cube" style rearview camera (Must match the photos)]
The Crossroads 3D Camera mount is precision-designed to fit common rearview backup/license plate cameras (Example)

The camera snaps into the protective cover securely. Top hole is for camera removal.

• Mount your rearview backup camera to any flat surface
• Choose between adhesive mount or screw mount
• Mount is secure and precision fit: includes integrated wire channel to run the cord out the back
• Fits the displayed camera type only
• All fasteners included
• Top hole is for camera removal
• Designed and Made in the USA by Americans
• Professionally printed in ASA

FITS WolfBox G900 style Camera (match the photos)
The Crossroads 3D Camera mount is precision-designed for the Wolfbox G900 / G930 style camera (not included.)

10-degree down angle is a screw mount designed for the Ford Transit High Roof, and has a wire exit underneath the bottom that goes straight down (intended to mount over top of a drilled hole.)

• Mount your G900 camera to any flat surface
• Choose mount type: Screws or automotive molding tape (clean surface before use)
• Mount is precision fit: includes integrated wire channel to run the cord out the back
• Fits the Wolfbox G900 Tripro rear camera only.
• Screws and/or tape included
• Designed and Made in the USA by Americans
• Professionally printed in ASA

Boost your ventilated seat performance with this custom under-seat air deflector! Redirects cold or hot air from the floor vents straight up into your seat fans for much faster cooling and heating.

• Fits Lexus IS500 2021-2026 – perfect for the V8 F Sport
• Fits Lexus IS350 2021-2026 with ventilated seats
• Fits Lexus IS300 2021-2026 with ventilated seats
• Choose driver side, passenger side, or pair
• Easy 30-second install – just slips into place under the front seat, no tools or mods
• 3D printed in tough ABS plastic in the USA by a family business
• Original Crossroads3D design – not an OEM part, but engineered for perfect airflow
• Made in America by Americans – support small business!

Lexus owners love how this simple upgrade makes cooled seats actually feel cold in summer and heated seats warm up instantly in winter. Works best with floor airflow on. Ships fast from the USA!

[FITS LEXUS GX460 2010-2013]

Lexus GX460 Cup holder upgrade allows for a more secure tumbler and cup holding by restricting the opening. Press-fit into place for a secure permanent installation without tools. (Replaces OEM center divider.)

Increased grip holds cups & tumblers tightly on the roughest of roads and trails. Strong secure fit. No tools, fasteners, or adhesive needed.

Choose from white, black, tan, or gray stripe.

• Grip: 1.5" inch deep
• Opening: 3 1/8" inch
• Precision fit for Yeti 20oz and 30oz tumblers and other popular brands with tapered bottom
• Does not move, rattle, or pull out when you lift your cup
• Professionally designed and 3D printed in the USA by Americans
• Note: Cover door does not close when installed.

[FITS LEXUS GX460 2010-2026]
[FITS 4Runner 2010-2024]

Boost your ventilated seat comfort with this custom under-seat air deflector! Designed to redirect hot or cold air from your floor vents directly upward into the seat ventilation fans for faster cooling/heating.

• Fits Toyota 4Runner 2010-2024 (5th gen)
• Fits Lexus GX460 2010-2026
• Increases airflow up into ventilated seats – make sure floor airflow is on for best results!
• Choose driver side, passenger side, or both (pair) when ordering
• Easy install – no modifications needed, drops in place under front seats
• Original design by Crossroads3D – not an OEM part, but engineered for exact fit on these models
• 3D printed in durable ABS plastic right here in the USA by an American family business
• Made in America by Americans

This deflector solves the common issue of weak rear seat airflow in these vehicles. Great upgrade for hotter summers or colder winters. Professional CAD design ensures precise fit and maximum air redirection.

[FITS LEXUS GX460 2017-2023]
***FOR REAR CAPTAIN SEAT ONLY - does not work with bench seat***
Lexus GX460 Rear Captain Seat cup holder upgrade allows for a more secure tumbler and cup holding by restricting the opening. Snap-fit into place for a secure permanent installation without tools. Easily Removable.

Increased grip holds cups & tumblers tightly on the roughest of roads and trails. Strong snap fit. No screws or adhesive tape needed.

• Vertical Grip: 2" inch
• Opening: 3 1/4" inch
• Precision fit for Yeti 20oz and 30oz tumblers and other popular brands with tapered bottom. Replaces flimsy OEM cup holders.
• Professionally designed and 3D printed in the USA by Americans.

/// NOTE: TAN COLOR WILL NOT PERFECTLY MATCH LEXUS INTERIOR
/// PRICE IS FOR ONE (1) CUP HOLDER
/// DESIGNED AND MADE IN THE USA

[FITS LEXUS GX460 2022-2023]

Lexus GX460 Cup holder upgrade allows for a more secure tumbler and cup holding by restricting the opening. Snap-fit into place for a secure permanent installation without tools, does not interfere with spring-loaded keepers underneath.

Increased grip holds cups & tumblers tightly on the roughest of roads and trails. Strong snap fit. No screws or adhesive tape needed.

Choose from white, black, or gray for the cup holder rings.

• Grip: 1" inch
• Opening: 3 1/8" inch
• Precision fit for Yeti 20oz and 30oz tumblers and other popular brands with tapered bottom
• Does not move, rattle, or pull out when you lift your cup
• Professionally designed and 3D printed in the USA by Americans
• Note: Cover door does not close when installed.

[FITS LEXUS GX460 2014-2021]

Lexus GX460 Cup holder upgrade allows for a more secure tumbler and cup holding by restricting the opening. Snap-fit into place for a secure permanent installation without tools, does not interfere with spring-loaded keepers underneath.

Increased grip holds cups & tumblers tightly on the roughest of roads and trails. Strong snap fit. No screws or adhesive tape needed.

Choose from white, black, or gray for the cup holder rings.

• Grip: 1" inch
• Opening: 3 1/8" inch
• Precision fit for Yeti 20oz and 30oz tumblers and other popular brands with tapered bottom
• Does not move, rattle, or pull out when you lift your cup
• Professionally designed and 3D printed in the USA by Americans
• Note: Cover door does not close when installed.

Lexus GX470 Cup holder upgrade allows for a more secure holding by restricting the opening. Friction / press-fit into place, replaces the center divider.

Increased depth cup holders hold tumblers tightly on the toughest of roads and trails. Press fit in place of OEM center divider. no screws or adhesive tape needed.

• Depth: 2 3/4" inch
• Opening: 3 1/8" inch
• Precision fit for Yeti 20oz and 30oz tumblers and other popular brands with tapered bottom
• "GX470" imprint on front
• Precision fit does not move, rattle, or pull out when lifting your cup
• Professionally designed and 3D printed
• Note: OEM lid cover will not close while this is installed.

/// MADE IN THE USA