Clean, factory-style camera install for your GM/Chevy full-size pickup. This custom third brake light camera mount is designed specifically for the Wolfbox G900 (including G900 Pro G930, and Tri Pro models) on Chevrolet Silverado and GMC Sierra trucks.

Mount your Wolfbox rear camera securely under the third brake light using factory mounting points for an OEM appearance with no drilling and minimal visible wiring. The integrated wire channel routes the camera cable cleanly and discreetly.

FITMENT:

• Chevrolet Silverado 1500: 2014–2018 (plus 2019 Silverado 1500 LD / Limited in most cab configs)
• GMC Sierra 1500: 2014–2018 (plus 2019 Sierra 1500 Limited in most configurations)
• Chevrolet Silverado 2500HD / 3500HD: 2015–2019
• GMC Sierra 2500HD / 3500HD: 2015–2019

Key Features:

• Exact fit for 2014-2019 Silverado & Sierra third brake lights
• Direct compatibility with Wolfbox G9 type cameras
• No-drill install using factory third brake light screws
• Hidden integrated wire channel for clean routing
• High mount position for optimal wide-angle rear view
• See the the 5th wheel hitch for towing
• Vibration-free, weatherproof design
• Premium 3D printed from durable ASA plastic
• Professional OEM look that blends seamlessly
• Easy 10-20 minute DIY install with basic tools
• Designed and made in the USA by Americans

Upgrade your Wolfbox G900/G930 dash cam setup with this premium pro-level mount for a secure, hidden, factory-integrated installation on your Chevy Silverado or GMC Sierra. Perfect for hardwired rear camera systems.

Upgrade your 1999-2016 Super Duty with a clean, professional rear camera installation! This precision 3D-printed mount installs under your third brake light for a factory-like appearance with zero visible wiring.

Fits Ford Super Duty 1999-2016 (F-250, F-350, F-450, F-550 models)

• Designed specifically for Wolfbox G9 series cameras - snaps in securely. Match the photo for fitment.
• Installs using the existing OEM screws
• Integrated hidden wire channel routes power cable cleanly inside the mount
• High mounting position reduces headlight glare and improves rear visibility
• Spacer-style design keeps a low-profile, sleek look on your truck
• Made from durable, UV-resistant ASA plastic - built tough for outdoor use
• Easy 10-15 minute install - perfect for DIYers
• No visible wires or messy adhesive mounts
• Great for backup camera, bed viewing, or towing applications
• Includes Sealant and new OEM gasket for light
• Wolfbox camera and third brake light sold separately
• Proudly Designed and Made in the USA

Give your ford Super Duty the cleanest Wolfbox camera setup possible - hidden wiring, secure fit, and pro-level results.
Message me with any fitment questions.

Ford F-150 (2009-2014) Third Brake Light (3-Bulb) Camera Mount for Wolfbox G900 Tripro – Hidden Wiring, No Visible Cables

Precision spacer mount installs under your Ford F-150's third brake light (high mount brake light) for a clean, professional Wolfbox rear camera setup. Designed specifically for the Wolfbox G900 (camera not included) – snaps in perfectly with zero visible wiring.

Note that this works with the 3-bulb variant only. If your light has only two bulbs, then this will not fit.

Key Benefits:

● **Does not fit the LED version from those years
● High position reduces road glare from headlights for clearer footage
● Low-profile spacer fits underneath the OEM third brake light using factory screws
● Includes rubber weather seals on both sides (essential for 2009-2014 trucks with aged seals)
● Easy DIY install: Phillips #1 and #2 screwdrivers only
● Weatherproof RTV seal included for secure mounting
● Made in the USA from durable ASA material, professionally 3D printed

Compatibility: Fits all Ford F-150 models 2009, 2010, 2011, 2012, 2013, 2014 (does not fit SVT Raptor or models with hill descent control if applicable – confirm your setup).
No drilling, no exposed wires – perfect for a stealth dash cam / rear view camera upgrade on your F-150 truck.

Jeep Wrangler JK (2007-2018) Third Brake Light Camera Mount for Wolfbox Cameras – No Drilling

Precision 3D printed mount for Jeep Wrangler JK 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018. Designed specifically for Wolfbox G900, G930, G800, G830, G850 style external rear camera (not included)

Mounts cleanly to the third brake light for optimal high-position view with integrated wire channel.

Key Features

• Secure snap-fit for Wolfbox Cameras (See photos for compatibility)
• Integrated wire channel
• No drilling or modifications – clamps on using included screws
• High mount reduces glare, improves rear visibility for off-road/trail use
• Durable ASA material, professionally printed in the USA
• Easy install: Phillips screwdriver only
• Printed in ASA

Compatibility: All Jeep Wrangler JK and JKU models (2-door/4-door/Unlimited) 2007-2018.
Not for JL or other years. Perfect stealth upgrade for dash cam/rear view on your JK or JKU Wrangler.

The Crossroads 3D Large Water Bottle adapter for Toyota Tundra 2014-2021 is designed to keep large drinks handy in the front cup holders while on the road. It fits into the existing console cup holders and is designed to hold very large water bottles. The adapter is precision-designed for a perfect fit. The Crossroads 3D water bottle adapter is a great way to keep large water bottles (like Nalgene and others,) and is a must-have accessory for any Tundra.

• Precision fit: The Crossroads water bottle adapter fits into the existing console cup holder of the Toyota Tundra (2014-2021). It is designed to hold water bottles with large diameters.
• Large capacity: The adapter can hold water bottles with large capacities, making it perfect for long drives or outdoor activities. Designed for Nalgene (3 5/8" diameter) and larger, 3 3/4" diameter bottles.
• Secure fit: The adapter is designed to securely hold your water bottle in place, preventing it from falling or sliding out of the cup holder.
• Choose the opening diameter (measure your water bottle). Contact me if I don't have your size.
• Easy installation: The adapter is easy to install and requires no tools or modifications. It simply slips into the existing cup holder and can be used immediately.
• Made in the USA: This cup holder adapter is designed and professionally 3D printed in the United States.

/// CHECK PICTURE FOR PROPER INTERIOR ////
[FITS 2011-2016 FORD SUPER DUTY F250, F350, F450 PICKUP]
* Now with stripe color variations. (Black Stripe = no stripe.)

This is a cup holder delete cover for 2011-2016 Ford super Duty F-250, F-350, F-450 pickups. The purpose is to cover up the rear console cup holders when not in use to protect dogs in the back from getting paws stuck, or any other reason.

This cup holder delete cover fits into the existing rear console cup holders, and is designed to be durable and fit tightly.

• Precision fit: The Crossroads dual cup holder delete cover slides into the existing rear console cup holder (must match style in photo).
• Secure: The delete cover is designed to stay securely in place, preventing it from falling or sliding out. Double-sided tape can be added to make it even more permanent.
• Simple installation: The delete cover is easy to install and requires no tools or modifications to the truck. It simply slips into the existing cup holders.
• Made in the USA: This cup holder delete cover is professionally designed and 3D printed by Americans in the United States.