Clean camera install for your Chevy Colorado & GMC Canyon (2015-2026)

This custom third brake light camera mount is designed specifically for Wolfbox dash cams (G900, G900 Pro, Tri Pro, and most similar models).

Mount your Wolfbox rear camera securely under the third brake light using the factory screws for a factory-like appearance with no visible wiring. The integrated wire channel routes the camera cable cleanly and discreetly.

Key Features:

• Precision fit for 2015+ GMC Canyon/Chevrolet Colorado (all trims including Trail Boss, ZR2, Canyon AT4X, etc)
• Compatible with Wolfbox G900 series cameras (SEE PICS)
• Uses existing third brake light mounting points - no drilling required
• Integrated hidden wire channel for completely clean, no-visible-wiring install
• Easy 10-20 minute install - basic hand tools only
• Keeps your rear camera high for optimal wide-angle view and better parking/reversing visibility
• Blends with factory third brake light housing
• 3D Printed from durable, weather-resistant ASA
• Designed and made in the USA by Americans

Why choose this mount?

• Clean install
• Secure and vibration-resistant
• Professional OEM-style look that doesn't scream "aftermarket"
• For hardwired Wolfbox setups

Installation note:
Simple DIY install. Remove the third brake light, attach the mount, route the wire through the hidden channel, and reinstall. Uses same OEM screws. For Wolfbox G9 camera style hardwire kits.

Upgrade your Wolfbox setup today with this sleek, hidden mount made just for the Chevy Colorado.

Jeep Wrangler JK (2007-2018) Third Brake Light Camera Mount for Wolfbox Cameras – No Drilling

Precision 3D printed mount for Jeep Wrangler JK 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018. Designed specifically for Wolfbox G900, G930, G800, G830, G850 style external rear camera (not included)

Mounts cleanly to the third brake light for optimal high-position view with integrated wire channel.

Key Features

• Secure snap-fit for Wolfbox Cameras (See photos for compatibility)
• Integrated wire channel
• No drilling or modifications – clamps on using included screws
• High mount reduces glare, improves rear visibility for off-road/trail use
• Durable ASA material, professionally printed in the USA
• Easy install: Phillips screwdriver only
• Printed in ASA

Compatibility: All Jeep Wrangler JK and JKU models (2-door/4-door/Unlimited) 2007-2018.
Not for JL or other years. Perfect stealth upgrade for dash cam/rear view on your JK or JKU Wrangler.

[CHECK PICTURE FOR PROPER INTERIOR (2015-2020)]

Crossroads Cup Holder / Console Tray Organizer for Ford F-150 (13th Gen, 2015-2020) pickups adds convenience to the driver's side pocket in the console. This tray fits into the existing center-console driver's side pocket, and is designed to be durable and fit tightly.

* NOTE: Does not work with console-shifter pickups.

• Holds YETI and other similar tapered-bottom tumblers
• Holds Energy Drink cans (large and small)
• Depth: pockets are 1 7/8" deep.
• Precision fit: The Crossroads organizer tray slides into the existing driver's side console pocket of the Ford F-150
• Multi-capacity: The tray holds business cards, pens and pencils, hand sanitizer, and more
• Color Options: Choose from Solid Black, Silver top edge, or any other custom color (leave an order note)
• Secure: The tray is designed to securely fit into place, preventing it from moving or rattling.
• Easy installation: The organizer tray is simple to install and requires no tools or truck modifications. It simply slips into the existing pocket and can be used immediately.
• Made in the USA: This organizer tray is designed and professionally 3D printed in the United States.

The Crossroads 3D Large Water Bottle adapter for Toyota Tundra 2014-2021 is designed to keep large drinks handy in the front cup holders while on the road. It fits into the existing console cup holders and is designed to hold very large water bottles. The adapter is precision-designed for a perfect fit. The Crossroads 3D water bottle adapter is a great way to keep large water bottles (like Nalgene and others,) and is a must-have accessory for any Tundra.

• Precision fit: The Crossroads water bottle adapter fits into the existing console cup holder of the Toyota Tundra (2014-2021). It is designed to hold water bottles with large diameters.
• Large capacity: The adapter can hold water bottles with large capacities, making it perfect for long drives or outdoor activities. Designed for Nalgene (3 5/8" diameter) and larger, 3 3/4" diameter bottles.
• Secure fit: The adapter is designed to securely hold your water bottle in place, preventing it from falling or sliding out of the cup holder.
• Choose the opening diameter (measure your water bottle). Contact me if I don't have your size.
• Easy installation: The adapter is easy to install and requires no tools or modifications. It simply slips into the existing cup holder and can be used immediately.
• Made in the USA: This cup holder adapter is designed and professionally 3D printed in the United States.

/// CHECK PICTURE FOR PROPER INTERIOR ////
[FITS 2011-2016 FORD SUPER DUTY F250, F350, F450 PICKUP]
* Now with stripe color variations. (Black Stripe = no stripe.)

This is a cup holder delete cover for 2011-2016 Ford super Duty F-250, F-350, F-450 pickups. The purpose is to cover up the rear console cup holders when not in use to protect dogs in the back from getting paws stuck, or any other reason.

This cup holder delete cover fits into the existing rear console cup holders, and is designed to be durable and fit tightly.

• Precision fit: The Crossroads dual cup holder delete cover slides into the existing rear console cup holder (must match style in photo).
• Secure: The delete cover is designed to stay securely in place, preventing it from falling or sliding out. Double-sided tape can be added to make it even more permanent.
• Simple installation: The delete cover is easy to install and requires no tools or modifications to the truck. It simply slips into the existing cup holders.
• Made in the USA: This cup holder delete cover is professionally designed and 3D printed by Americans in the United States.

The Crossroads 3D water bottle adapter for Ford F150 (13th Gen, 2015-2020) is a great accessory for anyone who wants to keep their large drinks handy while on the road. It fits into the existing front center-console cup holders and is designed to hold very large water bottles. The adapter is designed to be durable and fit tightly. The Crossroads 3D water bottle adapter is a great way to keep large water bottles (like Nalgene and others,) and is a must-have accessory for any Ford F150 (Gen 13).

• Precision fit: The Crossroads water bottle adapter fits into the existing console cup holder of the Ford F150 (13th Gen, 2015-2020). It is designed to hold water bottles with large diameters.
• Large capacity: The adapter can hold water bottles with large capacities, making it perfect for long drives or outdoor activities.
• Secure fit: The adapter is designed to securely hold your water bottle in place, preventing it from falling or sliding out of the cup holder.
• Easy installation: The adapter is easy to install and requires no tools or modifications. It simply slips into the existing cup holder and can be used immediately.
• Made in the USA: This cup holder adapter is designed and professionally 3D printed in the United States.
• Choose the opening diameter (measure your water bottle).