electronics Archives - Crossroads 3D

Bar Mount for Switch-Pros RCR-12 Powered Switch Panel

xr3d — Tue, 21 Nov 2023 17:41:56 +0000

Bar Mount for Switch-Pros RCR-12 Powered Switch Panel

Rated 5.00 out of 5 based on 1 customer rating

(1 customer review)

$36.95

Bar diameter

Clear

Electronics Not Included

This bar mount for the Switch-Pros RCR-12 12-button powered switch panel. It gives you a secure mount on any round bar.

Works with or without the Switch-Pros face bezel.

Convenient location
Mount your RCR-12 overhead on the bar. You can mount your panel over or under the bar, forward, or rearward (toward or away from your face.)
No cutting or drilling
No chopping up of your dash!
Easy install
Installation is simple and uses a Phillips screwdriver.
Attractive and Durable
This product is professionally 3D printed.
Customizable
If you need a switch panel for another bar size, contact me.

Check out the other sizes:

Assembly Instruction:

FITMENT: use the guide above to see what size to order. Please measure the diameter of your cross-bar to be certain.

Fits the following side by sides:

ARCTIC CAT Wildcat / Wildcat 4: 1.75″
CAN-AM Maverick and Maverick 4 seat: 2.0”
CAN-AM averick X3: 1.85″
CAN-AM Commander: 2.0”
HONDA Pioneer 1000: 1.75”
HONDA Pioneer 700: 1.625”
HONDA Pioneer 500: 1.625”
HONDA Big Red: 1.625”
HONDA Talon: 2″
KAWASAKI Teryx / Teryx 4 Top crossbars: 1.7”
POLARIS RZR 170: 1.25″
POLARIS XP1000 and XP4 1000: 1.75”
POLARIS XP Turbo and XP4 Turbo: 1.75”
POLARIS RZR 900 2015 and up: 1.75”
POLARIS RZR 570: 1.75”
YAMAHA YXZ Top crossbars: 1.5”
YAMAHA Rhino Top crossbars: 1.5”
YAMAHA Viking and Viking 6 seater: 2.0”
YAMAHA Wolverine Top crossbars: 1.5”
JEEP (many have a 2.25″ bar)

The post Bar Mount for Switch-Pros RCR-12 Powered Switch Panel appeared first on Crossroads 3D.

Bar Mount for Auxbeam 8 or 6-Gang Switch Panel

xr3d — Sun, 22 Jan 2023 15:40:33 +0000

Bar Mount for Auxbeam 8 or 6-Gang Switch Panel

Rated 5.00 out of 5 based on 5 customer ratings

(5 customer reviews)

$39.95

Bar diameter

Auxbeam type

Clear

Electronics Not Included

This bar mount for the popular Auxbeam 8-Gang or 6-Gang powered switch panels gives you a secure, flush-fit mount on any Round bar. Jeep, Honda Pioneer, Polaris RZR, Kawasaki Teryx, Yamaha Wolverine, RMAX, YXZ1000 and others.
- Convenient location
  Mount your Auxbeam overhead on the bar. This unit is “ambidextrous:” you can mount your switch panel over or under the bar, forward, or rearward (toward or away from your face.)
- No cutting or drilling
  No chopping up of your dash!
- Easy install
  Installation is simple and uses a Phillips screwdriver.
Be sure to choose the correct 6-Gang option (for AR-600 or BC60 model Auxbeam panel)
Be sure to choose the correct 8-Gang option(GB80, BB80 GA80, BB80 or XL)

Auxbeam Model Fitment:
- BA80
- BB80
- GB80
- GA80
- BC60
- GC60
- RA80 XL
- RB80 XL

Check out my other rocker-switch panels:

Assembly Instruction:

FITMENT: use the guide above to see what size to order. Please measure the diameter of your cross-bar to be certain.

Fits the following side by sides:

ARCTIC CAT Wildcat / Wildcat 4: 1.75″
CAN-AM Maverick and Maverick 4 seat: 2.0”
CAN-AM Maverick X3: 1.85″
CAN-AM Commander: 2.0”
HONDA Pioneer 1000: 1.75”
HONDA Pioneer 700: 1.625”
HONDA Pioneer 500: 1.625”
HONDA Big Red: 1.625”
HONDA Talon: 2″
KAWASAKI Teryx 2 & 4 Top crossbars: 1.7”
POLARIS RZR 170: 1.25″
POLARIS XP1000 and XP4 1000: 1.75”
POLARIS XP Turbo and XP4 Turbo: 1.75”
POLARIS RZR 900 2015 and up: 1.75”
POLARIS RZR 570: 1.75”
YAMAHA YXZ Top crossbars: 1.5”
YAMAHA Rhino Top crossbars: 1.5”
YAMAHA Viking and Viking 6 seater: 2.0”
YAMAHA Wolverine Top crossbars: 1.5”
JEEP (many have a 2.25″ bar)

The post Bar Mount for Auxbeam 8 or 6-Gang Switch Panel appeared first on Crossroads 3D.

Bar Mount for Switch-Pros SP9100

xr3d — Sun, 08 Jan 2023 16:53:08 +0000

Bar Mount for Switch-Pros SP9100

$44.95

Bar diameter

Clear

Electronics Not Included

This bar mount for the Switch-Pro SP9100 gives you a secure, flush-fit mount on any round bar.

Convenient location
Mount your SP 9100 overhead on the bar. This unit is “ambidextrous:” you can mount your panel over or under the bar, forward, or rearward (toward or away from your face.)
No cutting or drilling
No chopping up of your dash!
Easy install
Installation is simple and uses a Phillips screwdriver.
Attractive and Durable
The walls are 1/8″ thick. This switch panel won’t warp in the heat – the material used has similar characteristics as the factory plastic in your machine. This product is 3D printed.
Customizable
If you need a switch panel for another bar size, or other combination of switches and circle-holes, contact me.

Check out the other sizes:

Assembly Instruction:

FITMENT: use the guide above to see what size to order. Please measure the diameter of your cross-bar to be certain.

Fits the following side by sides:

ARCTIC CAT Wildcat / Wildcat 4: 1.75″
CAN-AM Maverick and Maverick 4 seat: 2.0”
CAN-AM averick X3: 1.85″
CAN-AM Commander: 2.0”
HONDA Pioneer 1000: 1.75”
HONDA Pioneer 700: 1.625”
HONDA Pioneer 500: 1.625”
HONDA Big Red: 1.625”
HONDA Talon: 2″
KAWASAKI Teryx / Teryx 4 Top crossbars: 1.7”
POLARIS RZR 170: 1.25″
POLARIS XP1000 and XP4 1000: 1.75”
POLARIS XP Turbo and XP4 Turbo: 1.75”
POLARIS RZR 900 2015 and up: 1.75”
POLARIS RZR 570: 1.75”
YAMAHA YXZ Top crossbars: 1.5”
YAMAHA Rhino Top crossbars: 1.5”
YAMAHA Viking and Viking 6 seater: 2.0”
YAMAHA Wolverine Top crossbars: 1.5”
JEEP (many have a 2.25″ bar)

The post Bar Mount for Switch-Pros SP9100 appeared first on Crossroads 3D.

Overhead-Mounted Switch Panel, 2-Gang

xr3d — Fri, 07 Oct 2022 18:54:23 +0000

Overhead-Mounted Switch Panel, 2-Gang

Rated 4.50 out of 5 based on 2 customer ratings

(2 customer reviews)

$29.95

Bar diameter

Clear

Electronics Not Included

This roll-bar-mounted switch panel holds 2 standard sized rocker switches.

Convenient location
Place your switches overhead on the bar. This unit is “ambidextrous:” you can mount your switches over or under the bar, forward, or rearward (toward or away from your face.)
No cutting or drilling
No chopping up of your dash!
Easy install
Installation is simple and uses a Phillips screwdriver.
Attractive and Durable
This 2-gang switch box is 2 3/4″ (2.75″ inch) wide. The walls are 1/8″ thick. This switch panel won’t warp in the heat – the material used has similar characteristics as the factory plastic in your machine. This product is 3D printed.
Customizable
If you need a switch panel for another bar size, or other combination of switches and circle-holes, contact me.

I don’t sell electronics, but you can get switches and things on Amazon: SXS Rocker Switches

Check out the other sizes:

Assembly Instruction:

FITMENT: use the guide above to see what size to order. Please measure the diameter of your cross-bar to be certain.

Fits the following side by sides:

ARCTIC CAT Wildcat / Wildcat 4: 1.75″
CAN-AM Maverick and Maverick 4 seat: 2.0”
CAN-AM averick X3: 1.85″
CAN-AM Commander: 2.0”
HONDA Pioneer 1000: 1.75”
HONDA Pioneer 700: 1.625”
HONDA Pioneer 500: 1.625”
HONDA Big Red: 1.625”
HONDA Talon: 2″
KAWASAKI Teryx / Teryx 4 Top crossbars: 1.7”
POLARIS RZR 170: 1.25″
POLARIS XP1000 and XP4 1000: 1.75”
POLARIS XP Turbo and XP4 Turbo: 1.75”
POLARIS RZR 900 2015 and up: 1.75”
POLARIS RZR 570: 1.75”
YAMAHA YXZ Top crossbars: 1.5”
YAMAHA Rhino Top crossbars: 1.5”
YAMAHA Viking and Viking 6 seater: 2.0”
YAMAHA Wolverine Top crossbars: 1.5”
JEEP: many 2.25″ roll bars

The post Overhead-Mounted Switch Panel, 2-Gang appeared first on Crossroads 3D.

Overhead-Mounted Switch Panel, 3-Gang

xr3d — Wed, 28 Sep 2022 20:57:32 +0000

Overhead-Mounted Switch Panel, 3-Gang

Rated 5.00 out of 5 based on 4 customer ratings

(4 customer reviews)

$39.95

Bar diameter

Clear

Electronics Not Included

This roll-bar-mounted switch panel holds 3 standard sized rocker switches.

Convenient location
Place your switches overhead on the bar. This unit is “ambidextrous:” you can mount your switches over or under the bar, forward, or rearward (toward or away from your face.)
No cutting or drilling
No chopping up of your dash!
Easy install
Installation is simple and uses a Phillips screwdriver.
Attractive and Durable
This switch panel box is 3 3/4″ wide (3.75″). The walls are 1/8″ thick. This switch panel won’t warp in the heat – the material used has similar characteristics as the factory plastic in your machine. This product is 3D printed.
Customizable
If you need a switch panel for another bar size, or other combination of switches and circle-holes, contact me.

I don’t sell electronics, but you can get switches and things on Amazon: SXS Rocker Switches

Check out the other sizes:

Assembly Instruction:

FITMENT: use the guide above to see what size to order. Please measure the diameter of your cross-bar to be certain.

Fits the following side by sides:

ARCTIC CAT Wildcat / Wildcat 4: 1.75″
CAN-AM Maverick and Maverick 4 seat: 2.0”
CAN-AM averick X3: 1.85″
CAN-AM Commander: 2.0”
HONDA Pioneer 1000: 1.75”
HONDA Pioneer 700: 1.625”
HONDA Pioneer 500: 1.625”
HONDA Big Red: 1.625”
HONDA Talon: 2″
KAWASAKI Teryx / Teryx 4 Top crossbars: 1.7”
POLARIS RZR 170: 1.25″
POLARIS XP1000 and XP4 1000: 1.75”
POLARIS XP Turbo and XP4 Turbo: 1.75”
POLARIS RZR 900 2015 and up: 1.75”
POLARIS RZR 570: 1.75”
YAMAHA YXZ Top crossbars: 1.5”
YAMAHA Rhino Top crossbars: 1.5”
YAMAHA Viking and Viking 6 seater: 2.0”
YAMAHA Wolverine Top crossbars: 1.5”
JEEP (many have a 2.25″ bar)

The post Overhead-Mounted Switch Panel, 3-Gang appeared first on Crossroads 3D.

Bar Mount for 3-Gang Pre-Wired Switch Panel

xr3d — Sat, 01 Aug 2020 17:18:11 +0000

Bar Mount for 3-Gang Pre-Wired Switch Panel

Rated 5.00 out of 5 based on 2 customer ratings

(2 customer reviews)

$34.95

This roll-bar-mounted switch panel pairs up with 3-Gang pre-wired switch panels, like the “FXC” brand panels and others.

Convenient location
Place your switches overhead on the bar. This unit is “ambidextrous:” you can mount your switches over or under the bar, forward, or rearward (toward or away from your face.)
No cutting or drilling
No chopping up of your dash!
Easy install
Installation is simple and uses a Phillips screwdriver.

Bar diameter

Clear

This roll-bar-mounted switch panel pairs up with 3-Gang pre-wired switch panels, like the “FXC” brand panels and others. (available here)

Convenient location
Place your switches overhead on the bar. This unit is “ambidextrous:” you can mount your switches over or under the bar, forward, or rearward (toward or away from your face.)
No cutting or drilling
No chopping up of your dash!
Easy install
Installation is simple and uses a Phillips screwdriver.

You can purchase 3-Gang pre-wired switch panels here:

Electronics Not Included

FITMENT: use the guide above to see what size to order. Please measure the diameter of your cross-bar to be certain.

Fits the following side by sides:

ARCTIC CAT Wildcat / Wildcat 4: 1.75″
CAN-AM Maverick and Maverick 4 seat: 2.0”
CAN-AM Maverick X3: 1.85″
CAN-AM Commander: 2.0”
HONDA Pioneer 1000: 1.75”
HONDA Pioneer 700: 1.625”
HONDA Pioneer 500: 1.625”
HONDA Big Red: 1.625”
HONDA Talon: 2″
KAWASAKI Teryx / Teryx 4 Top crossbars: 1.7”
POLARIS RZR 170: 1.25″
POLARIS XP1000 and XP4 1000: 1.75”
POLARIS XP Turbo and XP4 Turbo: 1.75”
POLARIS RZR 900 2015 and up: 1.75”
POLARIS RZR 570: 1.75”
YAMAHA YXZ Top crossbars: 1.5”
YAMAHA Rhino Top crossbars: 1.5”
YAMAHA Viking and Viking 6 seater: 2.0”
YAMAHA Wolverine Top crossbars: 1.5”
JEEP (many have 2.25″ roll bars)

The post Bar Mount for 3-Gang Pre-Wired Switch Panel appeared first on Crossroads 3D.

Bar Mount for 2-Gang Pre-Wired Switch Panel

xr3d — Fri, 31 Jul 2020 03:05:04 +0000

Bar Mount for 2-Gang Pre-Wired Switch Panel

Rated 5.00 out of 5 based on 4 customer ratings

(4 customer reviews)

$29.95

Bar diameter

Mount Type

Clear

This roll-bar-mounted switch panel pairs up with the FXC 2-Gang pre-wired switch panel (available here)

Convenient location
Place your switches overhead on the bar. This unit is “ambidextrous:” you can mount your switches over or under the bar, forward, or rearward (toward or away from your face.)
No cutting or drilling
No chopping up of your dash!
Easy install
Installation is simple and uses a Phillips screwdriver.

You can purchase the FXC 2-Gang pre-wired switch panels here:

FXC 2-gang plate with Blue switches

Electronics Not Included

FITMENT: use the guide above to see what size to order. Please measure the diameter of your cross-bar to be certain.

Fits the following side by sides:

ARCTIC CAT Wildcat / Wildcat 4: 1.75″
CAN-AM Maverick and Maverick 4 seat: 2.0”
CAN-AM Maverick X3: 1.85″
CAN-AM Commander: 2.0”
HONDA Pioneer 1000: 1.75”
HONDA Pioneer 700: 1.625”
HONDA Pioneer 500: 1.625”
HONDA Big Red: 1.625”
HONDA Talon: 2″
KAWASAKI Teryx / Teryx 4 Top crossbars: 1.7”
POLARIS RZR 170: 1.25″
POLARIS XP1000 and XP4 1000: 1.75”
POLARIS XP Turbo and XP4 Turbo: 1.75”
POLARIS RZR 900 2015 and up: 1.75”
POLARIS RZR 570: 1.75”
YAMAHA YXZ Top crossbars: 1.5”
YAMAHA Rhino Top crossbars: 1.5”
YAMAHA Viking and Viking 6 seater: 2.0”
YAMAHA Wolverine Top crossbars: 1.5”
JEEP (many have 2.25″ roll bars)

The post Bar Mount for 2-Gang Pre-Wired Switch Panel appeared first on Crossroads 3D.

Overhead-Mounted Switch Panel, 4-Gang

xr3d — Thu, 02 Jan 2020 17:38:11 +0000

Overhead-Mounted Switch Panel, 4-Gang

Rated 5.00 out of 5 based on 16 customer ratings

(16 customer reviews)

$59.95

Bar diameter

Clear

Electronics Not Included

This roll-bar-mounted switch panel holds 4 standard sized rocker switches.

Convenient location
Place your switches overhead on the bar. This unit is “ambidextrous:” you can mount your switches over or under the bar, forward, or rearward (toward or away from your face.)
No cutting or drilling
No chopping up of your dash!
Easy install
Installation is simple and uses a Phillips screwdriver.
Attractive and Durable
This 4-gang switch box is 5″ wide. The walls are 1/8″ thick. This switch panel won’t warp in the heat – the material used has similar characteristics as the factory plastic in your machine. This product is 3D printed.
Customizable
If you need a switch panel for another bar size, or other combination of switches and circle-holes, contact me.

I don’t sell electronics, but you can get switches and things on Amazon: SXS Rocker Switches

Check out the other sizes:

Assembly Instruction:

Electronics Not Included

FITMENT: use the guide above to see what size to order. Please measure the diameter of your cross-bar to be certain.

Fits the following side by sides:

ARCTIC CAT Wildcat / Wildcat 4: 1.75″
CAN-AM Maverick and Maverick 4 seat: 2.0”
CAN-AM Maverick X3: 1.85″
CAN-AM Commander: 2.0”
HONDA Pioneer 1000: 1.75”
HONDA Pioneer 700: 1.625”
HONDA Pioneer 500: 1.625”
HONDA Big Red: 1.625”
HONDA Talon: 2″
KAWASAKI Teryx / Teryx 4 Top crossbars: 1.7”
POLARIS RZR 170: 1.25″
POLARIS XP1000 and XP4 1000: 1.75”
POLARIS XP Turbo and XP4 Turbo: 1.75”
POLARIS RZR 900 2015 and up: 1.75”
POLARIS RZR 570: 1.75”
YAMAHA YXZ Top crossbars: 1.5”
YAMAHA Rhino Top crossbars: 1.5”
YAMAHA Viking and Viking 6 seater: 2.0”
YAMAHA Wolverine Top crossbars: 1.5”
JEEP (many have 2.25″ roll bars)

The post Overhead-Mounted Switch Panel, 4-Gang appeared first on Crossroads 3D.