Glove box for Pioneer 500 / Pioneer 520
Glove box for Pioneer 500 / Pioneer 520 - Image 2
Glove box for Pioneer 500 / Pioneer 520 - Image 3
Glove box for Pioneer 500 / Pioneer 520 - Image 4
Glove box for Pioneer 500 / Pioneer 520 - Image 5
Glove box for Pioneer 500 / Pioneer 520 - Image 6
Glove box for Pioneer 500 / Pioneer 520 - Image 7
Glove box for Pioneer 500 / Pioneer 520 - Image 8
Glove box for Pioneer 500 / Pioneer 520 - Image 9
Glove box for Pioneer 500 / Pioneer 520 - Image 10
Glove box for Pioneer 500 / Pioneer 520 - Image 11

Glove box for Pioneer 500 / Pioneer 520

(288 customer reviews)

Price range: $55.95 through $79.95

SKU: P500GB Categories: , , Tags: , , , ,

NEW FOR 2023: V3

NEW in V3: 1/4 turn twist latch, cleaner look, hidden hinge design.

Get the Honda Pioneer 500 / Pioneer 520 Glove box for in-cab storage. The largest and most factory-looking aftermarket glove box available for the P500 or P520. This glove box adds 130 cubic inches of storage (2.1 L). It holds phones, gloves, ratchet straps, etc. This glove box replaces the warning label in the dash.

(Also available in a weather resistant and lockable versions.)

  • Easy install
    Installation takes as little as 10 minutes.  Installation requires a utility knife, Philips screwdriver, and a tiny drill bit for pilot holes.
  • Customize it
    The glove box door is customizable with your own text on the lid. If you choose custom text, please leave your text in the “Order notes” (Look for the Orange Box when checking out.) Limit around 12 characters. If you want something else on there, like a picture or a simple logo, please contact me before ordering.
  • Satisfaction Guaranteed

Go here for more info and videos (earlier versions shown)

FITMENT:

Pioneer 500 - 520, all years.

* The dealer-insalled winch solenoid is mounted behind the warning plate. You will have to relocate it or anything else that occupies that space.

* Works with the OEM under-hood storage compartment.

Don't forget these

NGK Spark Plug

Oil Change Kit

P5 CHOMPS

Customer Reviews

Ken Millan
Ken Millan
Verified ownerVerified owner
5/5

It was easy to install and makes for a great addition.

4 days ago
Glove box for Pioneer 500 / Pioneer 520
Glove box for Pioneer 500 / Pioneer 520
Todd Macaulay
Todd Macaulay
Verified ownerVerified owner
5/5

Do it.

2 months ago
Glove box for Pioneer 500 / Pioneer 520
Glove box for Pioneer 500 / Pioneer 520
Jerry Giuseffi
Jerry Giuseffi
Verified ownerVerified owner
5/5

To spend the amount of time I spent…looking at the perfect place for a small storage box…and not being able to find something designed to plug right in was frustrating every time I looked at it. Fitment on this box was perfect. Very satisfied. No brainer

2 months ago
Glove box for Pioneer 500 / Pioneer 520
Glove box for Pioneer 500 / Pioneer 520
Mark Fuller
Mark Fuller
Verified ownerVerified owner
5/5

I really don't remember the last time I was this impressed with a new product. The fit was perfect, installation was simple, the lid opens and closes perfectly, the catch mechanism catches and pulls the lid shut with just the right amount of snugness. The monogramming is a nice touch, my wife was ecstatic when she saw her name etched into it. The instructions were spot on, easy to follow, I think I could do another one with my eyes closed, it really was that easy. Customer service is awesome as well. Great job Crossroads 3D!!!

3 months ago
Glove box for Pioneer 500 / Pioneer 520
Glove box for Pioneer 500 / Pioneer 520
Josh Endsley
Josh Endsley
Verified ownerVerified owner
5/5

Very well made and easy to install

4 months ago
Glove box for Pioneer 500 / Pioneer 520
Glove box for Pioneer 500 / Pioneer 520
5.0
Based on 288 reviews
5 star
97
97%
4 star
3
3%
3 star
0
0%
2 star
0%
1 star
0%

Customer Images

Image #1 from Randy Otto
Image #2 from Randy Otto
Image #1 from Daniel Clerget
Image #1 from Joe Hovey
Image #1 from Ryan Cox
Image #1 from Jami M.
Image #2 from Jami M.
Image #1 from SCOTT SEIBERT
Image #1 from Dan M 🇨🇦
Image #2 from Dan M 🇨🇦
Image #1 from Randy Otto

Randy Otto

I purchased the 3D glove box and upgraded cup holders for my 2017 Honda Pioneer P500 M2 , parts came quickly and I am impressed with the fit and quality of these parts. Great company to work with. Thank you Ian Smith. Randy O. WI.

Image #2 from Randy Otto

Randy Otto

I purchased the 3D glove box and upgraded cup holders for my 2017 Honda Pioneer P500 M2 , parts came quickly and I am impressed with the fit and quality of these parts. Great company to work with. Thank you Ian Smith. Randy O. WI.

Image #1 from Daniel Clerget

Daniel Clerget

This was a good purchase. It’s well constructed it. It came with good directions and went in within 30 minutes from the time. I started very very happy about it. Thanks, Dan.

Image #1 from Joe Hovey

Joe Hovey

Perfect fit and instructions. Must haves and easy install!!!!!

Image #1 from Ryan Cox

Ryan Cox

Easy install! Good quality!!

Image #1 from Jami M.

Jami M.

easy install and very satisfied with the results!! Would recommend if you need a compartment to store stuff. Honda should be doing this as part of production. Thanks Crossroads!!

Image #2 from Jami M.

Jami M.

easy install and very satisfied with the results!! Would recommend if you need a compartment to store stuff. Honda should be doing this as part of production. Thanks Crossroads!!

Image #1 from SCOTT SEIBERT

SCOTT SEIBERT

Awesome I love it best up grade I’ve done on my 520 thank you scott

Image #1 from Dan M 🇨🇦

Dan M 🇨🇦

I searched and researched all the different storage option for my P 520 and finally decided on the Crossroads in dash storage bin. I didn’t choose the glove box because I don’t like the appearance of the exposed hinge so, I went without the door.. During my research they mentioned that if you had a factory winch you would have to relocate some items for the box to fit. Unfortunately, none of the reviews I saw had this issue so, I went into this blind. The actual box install was quite simple and the directions were clear and easy to follow. However, the relocation of the wires were a little stressful. I really wasn’t prepared for this added work. After a bit of time to decide my best solution (as I already cut the hole in the dash) and a thread insert tool, everything came together. The only concern with the new location of my winch wires, I can’t install the under hood storage bin. Which I was planning to. I am very pleased with the way it looks and comes in very handy holding phones & my hat while wearing my helmet.

Image #2 from Dan M 🇨🇦

Dan M 🇨🇦

I searched and researched all the different storage option for my P 520 and finally decided on the Crossroads in dash storage bin. I didn’t choose the glove box because I don’t like the appearance of the exposed hinge so, I went without the door.. During my research they mentioned that if you had a factory winch you would have to relocate some items for the box to fit. Unfortunately, none of the reviews I saw had this issue so, I went into this blind. The actual box install was quite simple and the directions were clear and easy to follow. However, the relocation of the wires were a little stressful. I really wasn’t prepared for this added work. After a bit of time to decide my best solution (as I already cut the hole in the dash) and a thread insert tool, everything came together. The only concern with the new location of my winch wires, I can’t install the under hood storage bin. Which I was planning to. I am very pleased with the way it looks and comes in very handy holding phones & my hat while wearing my helmet.

Image #3 from Dan M 🇨🇦

Dan M 🇨🇦

I searched and researched all the different storage option for my P 520 and finally decided on the Crossroads in dash storage bin. I didn’t choose the glove box because I don’t like the appearance of the exposed hinge so, I went without the door.. During my research they mentioned that if you had a factory winch you would have to relocate some items for the box to fit. Unfortunately, none of the reviews I saw had this issue so, I went into this blind. The actual box install was quite simple and the directions were clear and easy to follow. However, the relocation of the wires were a little stressful. I really wasn’t prepared for this added work. After a bit of time to decide my best solution (as I already cut the hole in the dash) and a thread insert tool, everything came together. The only concern with the new location of my winch wires, I can’t install the under hood storage bin. Which I was planning to. I am very pleased with the way it looks and comes in very handy holding phones & my hat while wearing my helmet.

Image #4 from Dan M 🇨🇦

Dan M 🇨🇦

I searched and researched all the different storage option for my P 520 and finally decided on the Crossroads in dash storage bin. I didn’t choose the glove box because I don’t like the appearance of the exposed hinge so, I went without the door.. During my research they mentioned that if you had a factory winch you would have to relocate some items for the box to fit. Unfortunately, none of the reviews I saw had this issue so, I went into this blind. The actual box install was quite simple and the directions were clear and easy to follow. However, the relocation of the wires were a little stressful. I really wasn’t prepared for this added work. After a bit of time to decide my best solution (as I already cut the hole in the dash) and a thread insert tool, everything came together. The only concern with the new location of my winch wires, I can’t install the under hood storage bin. Which I was planning to. I am very pleased with the way it looks and comes in very handy holding phones & my hat while wearing my helmet.

Image #5 from Dan M 🇨🇦

Dan M 🇨🇦

I searched and researched all the different storage option for my P 520 and finally decided on the Crossroads in dash storage bin. I didn’t choose the glove box because I don’t like the appearance of the exposed hinge so, I went without the door.. During my research they mentioned that if you had a factory winch you would have to relocate some items for the box to fit. Unfortunately, none of the reviews I saw had this issue so, I went into this blind. The actual box install was quite simple and the directions were clear and easy to follow. However, the relocation of the wires were a little stressful. I really wasn’t prepared for this added work. After a bit of time to decide my best solution (as I already cut the hole in the dash) and a thread insert tool, everything came together. The only concern with the new location of my winch wires, I can’t install the under hood storage bin. Which I was planning to. I am very pleased with the way it looks and comes in very handy holding phones & my hat while wearing my helmet.

Image #1 from Randy Otto
Image #2 from Randy Otto
Image #1 from Daniel Clerget
Image #1 from Joe Hovey
Image #1 from Ryan Cox
Image #1 from Jami M.
Image #2 from Jami M.
Image #1 from SCOTT SEIBERT
Image #1 from Dan M 🇨🇦
Image #2 from Dan M 🇨🇦
Image #3 from Dan M 🇨🇦
Image #4 from Dan M 🇨🇦
Image #5 from Dan M 🇨🇦
1-5 of 288 reviews
  1. KM
    Ken Millan
    Verified owner
    Glove box for Pioneer 500 / Pioneer 520Glove box for Pioneer 500 / Pioneer 520

    It was easy to install and makes for a great addition.

  2. TM
    Todd Macaulay
    Verified owner
    Glove box for Pioneer 500 / Pioneer 520Glove box for Pioneer 500 / Pioneer 520

    Do it.

  3. JG
    Jerry Giuseffi
    Verified owner
    Glove box for Pioneer 500 / Pioneer 520Glove box for Pioneer 500 / Pioneer 520

    To spend the amount of time I spent…looking at the perfect place for a small storage box…and not being able to find something designed to plug right in was frustrating every time I looked at it. Fitment on this box was perfect. Very satisfied. No brainer

  4. MF
    Mark Fuller
    Verified owner
    Glove box for Pioneer 500 / Pioneer 520Glove box for Pioneer 500 / Pioneer 520

    I really don’t remember the last time I was this impressed with a new product. The fit was perfect, installation was simple, the lid opens and closes perfectly, the catch mechanism catches and pulls the lid shut with just the right amount of snugness. The monogramming is a nice touch, my wife was ecstatic when she saw her name etched into it. The instructions were spot on, easy to follow, I think I could do another one with my eyes closed, it really was that easy. Customer service is awesome as well. Great job Crossroads 3D!!!

  5. JE
    Josh Endsley
    Verified owner
    Glove box for Pioneer 500 / Pioneer 520Glove box for Pioneer 500 / Pioneer 520

    Very well made and easy to install