Upgrade your 1999-2016 Super Duty with a clean, professional rear camera installation! This precision 3D-printed mount installs under your third brake light for a factory-like appearance with zero visible wiring.

Fits Ford Super Duty 1999-2016 (F-250, F-350, F-450, F-550 models)

• Designed specifically for Wolfbox G9 series cameras - snaps in securely. Match the photo for fitment.
• Installs using the existing OEM screws
• Integrated hidden wire channel routes power cable cleanly inside the mount
• High mounting position reduces headlight glare and improves rear visibility
• Spacer-style design keeps a low-profile, sleek look on your truck
• Made from durable, UV-resistant ASA plastic - built tough for outdoor use
• Easy 10-15 minute install - perfect for DIYers
• No visible wires or messy adhesive mounts
• Great for backup camera, bed viewing, or towing applications
• Includes Sealant and new OEM gasket for light
• Wolfbox camera and third brake light sold separately
• Proudly Designed and Made in the USA

Give your ford Super Duty the cleanest Wolfbox camera setup possible - hidden wiring, secure fit, and pro-level results.
Message me with any fitment questions.

[FITS 2023-2025 Super Duty Pickups]
Crossroads 3D switch panel mount for Ford Super Duty trucks (5th Gen, 2023-2025) mounts the Feniex 4200 powered mini controller. It's a great accessory to add these controller switches to the truck.

• Precision fit: The Crossroads panel slides into the existing driver's side pocket in the truck
• Switch Mount: fits Feniex Industries 4200 Mini Controller
• Secure: The switch panel is designed to securely hold your Feniex Mini Controller. Includes slots on the sides to add strip of 3M double-sided molding tape if even more stability is desired.
• Easy installation: The switch panel is easy to install and requires no tools or modifications. It simply slips into the existing console pocket and can be used immediately.
• Cup holder: The cup holder adds a spot for your 20oz or 30oz tumbler to the driver's side (Yeti and similar)
• Pockets: Includes mini pass-through pockets for storing pens, pencils, lighter, etc.
• Made in the USA: This panel is designed and professionally 3D printed in the United States by Americans.

Feniex Industries 4200 Mini Controller can be found here. (Not included)

[CHECK PICTURE FOR PROPER INTERIOR (2017-2022)]

Crossroads 3D Console Tray Organizer for Ford Super Duty, F-250, F-250 (2017-2022) pickups adds convenience to the driver's side pocket in the console. This tray fits into the existing center-console driver's side pocket, and is precision-designed to fit tight.

* NOTE: Does not work with console-shifter pickups.

• Holds both large or small energy drink cans and common tumbled (Yeti, etc)
• Depth: pockets are 1 5/8" deep.
• Precision fit: The Crossroads organizer tray slides into the existing driver's side console pocket of the Ford F-150
• Multi-capacity: The tray holds business cards, pens and pencils, hand sanitizer, and more
• Color Options: Choose from Solid Black, Silver top edge, or any other custom color (leave an order note)
• Secure: The tray is designed to securely fit into place, preventing it from moving or rattling.
• Easy installation: The organizer tray is simple to install and requires no tools or truck modifications. It simply slips into the existing pocket and can be used immediately.
• Made in the USA: This organizer tray is designed and professionally 3D printed in the United States.

The Crossroads 3D Camera mount is precision-designed to fit the Wolfbox G900 Tripro rear camera (not included.)

Truck fitment: Tested with F-150/Raptor and Super Duty 2017+. May fit other years.

For trucks with Rear slider only!

What version should you choose: 
Choose the "With Sunroof (big gap)" if you can get a finger in easily above the rear window and the headliner. The gap would be about about 1/2".
Choose the "Without Sunroof (small gap) if your gap above the rear window is more like 1/8", and poking your finger in there is difficult.

• Mount your rear camera to the rear edge of the headliner, so that the camera sees out the rear windshield.
• Easy, Snap-in installation
• Mount does not interfere with powered rear sliding window
• Mount is secure and precision fit, includes integrated wire channel, to run the cord up into the headliner
• Fits the Wolfbox G900 Tripro rear camera (not included)
• Choose if you have a sunroof (big gap) or no sunroof (small gap) version
• Designed and Made in the USA by Americans
• Professionally printed from ABS.

[TESTED TO FIT: Super Duty 2017-26, and Raptor 2021-26]

The Crossroads 3D Camera mount is precision-designed to fit the Wolfbox G900 Tripro rear camera (not included.)

• Mount your rear camera to the third brake light using the OEM screws.
• Mount is secure and precision fit, includes integrated wire channel, to run the cord out either side.
• Inverted G9 type available, where wide side of camera is facing up.
• Professionally printed from ASA.
• Fits the Wolfbox G900 Tripro rear camera only.
• Designed and Made in the USA by Americans

[CHECK PICTURE FOR PROPER INTERIOR (2023-2025)]

Crossroads 3D Console Tray Organizer for Ford Super Duty, F-250, F-250 (2023-2025) pickups adds convenience to the driver's side pocket in the console.

This tray fits into the existing center-console driver's side pocket, and is designed to be durable and fit tightly.

* NOTE: Does not work with console-shifter pickups.

• Holds both large or small energy drink cans
• Depth: pockets are 1 7/8" deep.
• Precision fit: The Crossroads organizer tray slides into the existing driver's side console pocket of the Ford F-150
• Multi-capacity: The tray holds business cards, pens and pencils, hand sanitizer, and more
• Color Options: Choose from Solid Black, Silver top edge, or any other custom color (leave an order note)
• Secure: The tray is designed to securely fit into place, preventing it from moving or rattling.
• Easy installation: The organizer tray is simple to install and requires no tools or truck modifications. It simply slips into the existing pocket and can be used immediately.
• Made in the USA: This organizer tray is designed and professionally 3D printed in the United States.

/// CHECK PICTURE FOR PROPER INTERIOR ////
[FITS 2011-2016 FORD SUPER DUTY F250, F350, F450 PICKUP]
* Now with stripe color variations. (Black Stripe = no stripe.)

This is a cup holder delete cover for 2011-2016 Ford super Duty F-250, F-350, F-450 pickups. The purpose is to cover up the rear console cup holders when not in use to protect dogs in the back from getting paws stuck, or any other reason.

This cup holder delete cover fits into the existing rear console cup holders, and is designed to be durable and fit tightly.

• Precision fit: The Crossroads dual cup holder delete cover slides into the existing rear console cup holder (must match style in photo).
• Secure: The delete cover is designed to stay securely in place, preventing it from falling or sliding out. Double-sided tape can be added to make it even more permanent.
• Simple installation: The delete cover is easy to install and requires no tools or modifications to the truck. It simply slips into the existing cup holders.
• Made in the USA: This cup holder delete cover is professionally designed and 3D printed by Americans in the United States.