switchpro Archives - Crossroads 3D

Bar Mount for Switch-Pros RCR-12 Powered Switch Panel

xr3d — Tue, 21 Nov 2023 17:41:56 +0000

Bar Mount for Switch-Pros RCR-12 Powered Switch Panel

Rated 5.00 out of 5 based on 1 customer rating

(1 customer review)

$36.95

Bar diameter

Clear

Electronics Not Included

This bar mount for the Switch-Pros RCR-12 12-button powered switch panel. It gives you a secure mount on any round bar.

Works with or without the Switch-Pros face bezel.

Convenient location
Mount your RCR-12 overhead on the bar. You can mount your panel over or under the bar, forward, or rearward (toward or away from your face.)
No cutting or drilling
No chopping up of your dash!
Easy install
Installation is simple and uses a Phillips screwdriver.
Attractive and Durable
This product is professionally 3D printed.
Customizable
If you need a switch panel for another bar size, contact me.

Check out the other sizes:

Assembly Instruction:

FITMENT: use the guide above to see what size to order. Please measure the diameter of your cross-bar to be certain.

Fits the following side by sides:

ARCTIC CAT Wildcat / Wildcat 4: 1.75″
CAN-AM Maverick and Maverick 4 seat: 2.0”
CAN-AM averick X3: 1.85″
CAN-AM Commander: 2.0”
HONDA Pioneer 1000: 1.75”
HONDA Pioneer 700: 1.625”
HONDA Pioneer 500: 1.625”
HONDA Big Red: 1.625”
HONDA Talon: 2″
KAWASAKI Teryx / Teryx 4 Top crossbars: 1.7”
POLARIS RZR 170: 1.25″
POLARIS XP1000 and XP4 1000: 1.75”
POLARIS XP Turbo and XP4 Turbo: 1.75”
POLARIS RZR 900 2015 and up: 1.75”
POLARIS RZR 570: 1.75”
YAMAHA YXZ Top crossbars: 1.5”
YAMAHA Rhino Top crossbars: 1.5”
YAMAHA Viking and Viking 6 seater: 2.0”
YAMAHA Wolverine Top crossbars: 1.5”
JEEP (many have a 2.25″ bar)

The post Bar Mount for Switch-Pros RCR-12 Powered Switch Panel appeared first on Crossroads 3D.

Bar Mount for Switch-Pro 9100 and Additional Custom Slot

xr3d — Tue, 07 Nov 2023 17:08:29 +0000

Bar Mount for Switch-Pro 9100 and Additional Custom Slot

Rated 5.00 out of 5 based on 1 customer rating

(1 customer review)

$65.95

Bar diameter

Clear

This roll-bar-mounted switch panel pairs up with a Switch-Pro SP 9100 8-Gang pre-wired switch panel plus another hole or slot of your choice to the side. (Contact me for your customization needs.)

Convenient location
Place your switches overhead on the bar. This unit is “ambidextrous:” you can mount your switches over or under the bar, forward, or rearward (toward or away from your face.)
No cutting or drilling
No chopping up of your dash!
Easy install
Installation is simple and uses a Phillips screwdriver.

Electronics Not Included

FITMENT: use the guide above to see what size to order. Please measure the diameter of your cross-bar to be certain.

Fits the following side by sides:

ARCTIC CAT Wildcat / Wildcat 4: 1.75″
CAN-AM Maverick and Maverick 4 seat: 2.0”
CAN-AM Maverick X3: 1.85″
CAN-AM Commander: 2.0”
HONDA Pioneer 1000: 1.75”
HONDA Pioneer 700: 1.625”
HONDA Pioneer 500: 1.625”
HONDA Big Red: 1.625”
HONDA Talon: 2″
KAWASAKI Teryx / Teryx 4 Top crossbars: 1.7”
POLARIS RZR 170: 1.25″
POLARIS XP1000 and XP4 1000: 1.75”
POLARIS XP Turbo and XP4 Turbo: 1.75”
POLARIS RZR 900 2015 and up: 1.75”
POLARIS RZR 570: 1.75”
YAMAHA YXZ Top crossbars: 1.5”
YAMAHA Rhino Top crossbars: 1.5”
YAMAHA Viking and Viking 6 seater: 2.0”
YAMAHA Wolverine Top crossbars: 1.5”
JEEP (many have 2.25″ roll bars)

The post Bar Mount for Switch-Pro 9100 and Additional Custom Slot appeared first on Crossroads 3D.

Bar Mount for Switch-Pros SP9100

xr3d — Sun, 08 Jan 2023 16:53:08 +0000

Bar Mount for Switch-Pros SP9100

$44.95

Bar diameter

Clear

Electronics Not Included

This bar mount for the Switch-Pro SP9100 gives you a secure, flush-fit mount on any round bar.

Convenient location
Mount your SP 9100 overhead on the bar. This unit is “ambidextrous:” you can mount your panel over or under the bar, forward, or rearward (toward or away from your face.)
No cutting or drilling
No chopping up of your dash!
Easy install
Installation is simple and uses a Phillips screwdriver.
Attractive and Durable
The walls are 1/8″ thick. This switch panel won’t warp in the heat – the material used has similar characteristics as the factory plastic in your machine. This product is 3D printed.
Customizable
If you need a switch panel for another bar size, or other combination of switches and circle-holes, contact me.

Check out the other sizes:

Assembly Instruction:

FITMENT: use the guide above to see what size to order. Please measure the diameter of your cross-bar to be certain.

Fits the following side by sides:

ARCTIC CAT Wildcat / Wildcat 4: 1.75″
CAN-AM Maverick and Maverick 4 seat: 2.0”
CAN-AM averick X3: 1.85″
CAN-AM Commander: 2.0”
HONDA Pioneer 1000: 1.75”
HONDA Pioneer 700: 1.625”
HONDA Pioneer 500: 1.625”
HONDA Big Red: 1.625”
HONDA Talon: 2″
KAWASAKI Teryx / Teryx 4 Top crossbars: 1.7”
POLARIS RZR 170: 1.25″
POLARIS XP1000 and XP4 1000: 1.75”
POLARIS XP Turbo and XP4 Turbo: 1.75”
POLARIS RZR 900 2015 and up: 1.75”
POLARIS RZR 570: 1.75”
YAMAHA YXZ Top crossbars: 1.5”
YAMAHA Rhino Top crossbars: 1.5”
YAMAHA Viking and Viking 6 seater: 2.0”
YAMAHA Wolverine Top crossbars: 1.5”
JEEP (many have a 2.25″ bar)

The post Bar Mount for Switch-Pros SP9100 appeared first on Crossroads 3D.

Dash Mount for 2022 Pioneer 1000 & Switch-Pros SP9100

xr3d — Sun, 08 Jan 2023 16:44:57 +0000

Dash Mount for 2022 Pioneer 1000 & Switch-Pros SP9100

$34.95

Panel Mount Type

Clear

SKU: P1K22SP9 Category: Pioneer 1000 Tags: 2022 honda pioneer 1000, 2022 P1K, 2022 pioneer, 2022 pioneer 1K, 22 pioneer 1000, pioneer accessory, pioneer switch panel, pioneer switch plate, sp9100, switch plate, switch pro 9, switch-pros, switchpro, switchpros, utv accessory

FITMENT: Fits 2022 Pioneer 1000 (All trims)

This 2022+ Pioneer 1000 dash panel provides a ready-made mount for the Switch-Pro SP9100, replacing the warning label to the right of the shifters. Choose from surface or flush-mount when ordering.

Convenient location
This secures the SP9100 cleanly to the dash of the ’22+ Pioneer 1000
Easy install
Remove the warning label rives by drilling off the rivet head. Fastens to the dash with 4 push clips (included). Some dash cutting necessary for wires or flush-mount.

The post Dash Mount for 2022 Pioneer 1000 & Switch-Pros SP9100 appeared first on Crossroads 3D.

Dash Panel Mount for the Honda Talon & Switch-Pros SP9100

xr3d — Fri, 06 Jan 2023 03:35:27 +0000

Dash Panel Mount for the Honda Talon & Switch-Pros SP9100

Rated 5.00 out of 5 based on 1 customer rating

(1 customer review)

$34.95

Mount Type

Clear

SKU: TDP_MnSP9100 Category: Honda Talon Tags: honda talon panel, sp-9100, sp9100, switch plate, switch-pro, switch-pros, switchpro, switchpros, talon dash panel, talon dash plate, talon switch panel, talon switch plate, utv accessory

FITMENT: Fits Honda Talon (all models)

This switch panel is made to mount the Switch-Pro SP9100 to the center console of the Honda Talon.

Choose from surface mount or flush mount option.

Great looking
These panels feature a textured black front face that looks close to factory.
Convenient location
This SP 9100 switch panel power system mounts right in the center of the Talon dash.
Easy install
Includes Honda push clips – just drill 4 holes

The post Dash Panel Mount for the Honda Talon & Switch-Pros SP9100 appeared first on Crossroads 3D.