This console mount is designed specifically for the Yamaha Wolverine RMAX to securely hold your Auxbeam 8-Gang powered switch panel in the ideal, easy-to-reach position. It installs cleanly into the lower center cubby, giving you a factory-like fit with no  cutting required. Perfect for RMAX owners who want organized, professional-looking programmable control of their lights, winch, heated seats, and other accessories while keeping everything vibration-resistant and trail-ready.

Key Features:

• Direct fit for Yamaha Wolverine RMAX console
• Securely mounts Auxbeam 8-Gang powered switch panel (Not XL version)
• Keeps switches in the perfect driver-friendly position
• Built tough to withstand off-road vibration and harsh conditions
• Flush mount maintains a sleek, factory-integrated appearance
• Quick and simple installation, 4 phillips screws
• Ideal for controlling lights, winch, heated gear, and more
• Great upgrade for Yamaha RMAX 1000 owners running programmable accessories
• Improves safety and convenience by keeping controls easily accessible
• Designed and Professionally 3D printed in the USA using high-quality, durable materials

This mount delivers the cleanest and most functional way to integrate your Auxbeam 8-gang switch panel into your RMAX. Made in the USA for riders who demand quality and reliability on every trail!

Powered Switch Panel not included. You can find them here:
Auxbeam 8-gang switch panel

Auxbeam Model Fitment:

• BA80
• BB80
• GB80
• GA80

FITS WolfBox G840, G850 style Camera (match the photos)
The Crossroads 3D Camera mount is precision-designed for the Wolfbox G840, G850 style camera (not included.)

10-degree down angle is a screw mount designed for the Ford Transit High Roof, and has a wire exit underneath the bottom that goes straight down (intended to mount over top of a drilled hole.)

• Mount your Wolfbox camera to any flat surface
• Choose mount type: Screws or automotive molding tape (clean surface before use)
• Mount is precision fit: includes integrated wire channel to run the cord out the back
• Fits the Wolfbox G840, G850 rear camera only.
• Screws and/or tape included
• Designed and Made in the USA by Americans
• Professionally printed in ASA

Wolfbox G900 Rear Camera High-Mount Pod - 12° degree Down Angle, Sleek Weather Cover

Mount your Wolfbox rear camera high up on flat surfaces like camper roofs, trailer tops, or high-roof van exteriors with this angled adhesive pod. The built-in 12-degree downward tilt provides optimal rear viewing without awkward adjustments—perfect for elevated installations where a level mount would point too high.

• Designed for Wolfbox G900, G900 Pro, G900 Tripro, and similar rear camera models (check photos for match)
• 12° built-in down angle ideal for high placements on campers, travel trailers, fifth wheels, or roof-mounted setups
• Sleek protective cover shields the camera from rain, dust, UV, and road debris for reliable all-weather performance
• Choose from stainless screw or automotive-grade adhesive mounting for secure mounting on metal, fiberglass, or composite surfaces
• Wire exit options: choose bottom cable exit or rear exit when ordering
• Durable, weather-resistant construction holds up in outdoor vehicle environments
• Easy install: snap in camera, install base plate, and install. (Camera NOT included – mount and cover only)
• Proudly designed and made in the USA by Americans

Great for high-roof cargo vans like Ford Transit (including high-roof models), Mercedes-Benz Sprinter (high-roof), Ram ProMaster (high-roof), and similar setups where you need downward-angled rear visibility from elevated positions.

Not sure if it fits your setup? Message me with your vehicle details or a photo—I'll confirm compatibility fast!

Protect your premium Baja Designs LED light pods from rocks, debris, branches, and trail damage without sacrificing style or performance. This durable rubber cover snaps onto the light and provides rugged protection for off-road abuse while maintaining a clean, low-profile look on your S1 or S2 series accessory LED pods.

• Flexible rubber construction — tough against impacts, UV-resistant, and built to last in extreme conditions
• Two versions available — fully closed for maximum protection when lights are not in use, or open-hole design to allow full light output while still protecting the metal pod housing
• Precision fit — engineered specifically for Baja Designs accessory LED pods for a secure, no-slip hold
• Easy on/off installation — no tools required, quick to remove for cleaning or full illumination
• Black finish — complements the factory Baja Designs aesthetic and reduces glare when closed
• Designed and Made in the USA by Americans

[FITS: "cube" style rearview camera (Must match the photos)]
The Crossroads 3D Camera mount is precision-designed to fit common rearview backup/license plate cameras (Example)

The camera snaps into the protective cover securely. Top hole is for camera removal.

• Mount your rearview backup camera to any flat surface
• Choose between adhesive mount or screw mount
• Mount is secure and precision fit: includes integrated wire channel to run the cord out the back
• Fits the displayed camera type only
• All fasteners included
• Top hole is for camera removal
• Designed and Made in the USA by Americans
• Professionally printed in ASA

FITS WolfBox G900 style Camera (match the photos)
The Crossroads 3D Camera mount is precision-designed for the Wolfbox G900 / G930 style camera (not included.)

10-degree down angle is a screw mount designed for the Ford Transit High Roof, and has a wire exit underneath the bottom that goes straight down (intended to mount over top of a drilled hole.)

• Mount your G900 camera to any flat surface
• Choose mount type: Screws or automotive molding tape (clean surface before use)
• Mount is precision fit: includes integrated wire channel to run the cord out the back
• Fits the Wolfbox G900 Tripro rear camera only.
• Screws and/or tape included
• Designed and Made in the USA by Americans
• Professionally printed in ASA

[FITS: Yamaha RMAX 1000 (Wolverine) + Wolfbox g900 Tripro camera]

Elevate your off-road situational awareness and video capture with the WolfBox g900 Camera Mount, specifically designed for Yamaha RMAX Wolverine SXS vehicles. This sturdy mounting solution ensures your camera stays securely in place while navigating challenging terrain. The mount's thoughtful design allows for optimal positioning to capture your forward view without compromising your vehicle's functionality or driver visibility. Perfect for recording trail rides or getting a good view of close-up treacherous terrain while riding your RMAX 1000. The mount's durable construction stands up to the demands of off-road use while providing stable, vibration-resistant support for your camera equipment. Installation is straightforward, utilizing existing mounting points for a clean, integrated look that complements your vehicle's appearance. Wolfbox camera not included.

• COMPATIBILITY: Specifically designed to mount securely on Yamaha RMAX and Wolverine 1000 models while providing stable Wolfbox g900 camera support (See grille pic to verify fitment. )
• SECURE MOUNTING: Heavy-duty construction ensures your camera stays firmly in place even during rough terrain rides and challenging conditions
• QUICK INSTALLATION: design allows for easy attachment and removal of the mount without permanent modifications to your vehicle. Only tool needed is a Philips screwdriver.
• POSITIONING: The mount is fixed for stability and simple, durable construction, but the Wolfbox G900 cameras are digitally adjustable.
• DURABILITY: Professionally printed from ASA to withstand outdoor elements and maintain stability during even the hottest off-road adventures
• MADE IN THE USA: Designed and made in the USA by a small family business.

This defroster vent hose attachment replaces the one that comes with the "Inferno" brand cab heater for the Honda Pioneer 500 and 520, Yamaha RMAX, and Yamaha Rhino.

• This vent adds a 90-degree bend to allow the hose to hook up at a better angle.
• It fits in the passenger or driver side defroster position, and uses the exact same holes and openings as Inferno's vent piece.
• This vent fits the Yamaha Wolverine, RMAX and Rhino over the glove box and over the steering column for cab heater installations.
• When installed on the passenger side, allows you to have both a cab heater and a glove box installed.
• When installed on the driver side, it makes it so that the hose doesn't rub the steering linkage.
• Choose "Include Louvre" to get the vent exit piece for custom applications.

//// 3D Printed from high-temp ABS
//// DESIGNED AND MADE IN THE USA BY AMERICANS