10-degree down angle is a screw mount designed for the Ford Transit High Roof, and has a wire exit underneath the bottom that goes straight down (intended to mount over top of a drilled hole.)

• Mount your Wolfbox camera to any flat surface
• Choose mount type: Screws or automotive molding tape (clean surface before use)
• Mount is precision fit: includes integrated wire channel to run the cord out the back
• Fits the Wolfbox G840, G850 rear camera only.
• Screws and/or tape included
• Designed and Made in the USA by Americans
• Professionally printed in ASA

The post Protective Cover Mount for Wolfbox Camera G840, G850 (Screw or Adhesive mount) appeared first on Crossroads 3D.

Precision spacer mount installs under your Ford F-150's third brake light (high mount brake light) for a clean, professional Wolfbox rear camera setup. Designed specifically for the Wolfbox G900 (camera not included) – snaps in perfectly with zero visible wiring.

Note that this works with the 3-bulb variant only. If your light has only two bulbs, then this will not fit.

Key Benefits:

● **Does not fit the LED version from those years
● High position reduces road glare from headlights for clearer footage
● Low-profile spacer fits underneath the OEM third brake light using factory screws
● Includes rubber weather seals on both sides (essential for 2009-2014 trucks with aged seals)
● Easy DIY install: Phillips #1 and #2 screwdrivers only
● Weatherproof RTV seal included for secure mounting
● Made in the USA from durable ASA material, professionally 3D printed

Compatibility: Fits all Ford F-150 models 2009, 2010, 2011, 2012, 2013, 2014 (does not fit SVT Raptor or models with hill descent control if applicable – confirm your setup).
No drilling, no exposed wires – perfect for a stealth dash cam / rear view camera upgrade on your F-150 truck.

The post Ford F-150 (2009-2014 3-bulb) Third Brake Light Camera Mount for Wolfbox Cameras – No visible wiring appeared first on Crossroads 3D.

• High mount position helps decrease road glare from headlights.
• Spacer-style mount installs underneath 3rd brake light for a premium and professional low-profile mount that is easy to install.
• No visible wires

Needed for installation:
Phillips #2, Phillips #1

Features:

• Mount your Wolfbox G900 camera to the third brake light using the OEM screws
• Mount is secure and precision fit: includes integrated wire channel to run the cord out either side
• Fits any Wolfbox camera that matches the photo (like the G900 or "Tripro"), which snaps directly into the housing for a precision fit
• Attaches underneath high brake light, includes weather seal.
• Designed and Made in the USA by Americans
• Professionally printed

Fitment:

The post Ford Trucks (2015-2026) Third Brake Light Camera Mount for Wolfbox Cameras – Hidden Wiring appeared first on Crossroads 3D.

The Crossroads 3D Camera mount is precision-designed to fit the Wolfbox G900 Tripro rear camera (not included.)

• Mount your rear camera to the third brake light using the OEM screws.
• Mount is secure and precision fit, includes integrated wire channel, to run the cord out either side.
• Professionally printed from ASA.
• Fits the Wolfbox G900 Tripro rear camera only.
• Designed and Made in the USA by Americans

The post Wolfbox Camera Mount for Ford Maverick (22-25) – Third Brake Light Mount appeared first on Crossroads 3D.

10-degree down angle is a screw mount designed for the Ford Transit High Roof, and has a wire exit underneath the bottom that goes straight down (intended to mount over top of a drilled hole.)

• Mount your G900 camera to any flat surface
• Choose mount type: Screws or automotive molding tape (clean surface before use)
• Mount is precision fit: includes integrated wire channel to run the cord out the back
• Fits the Wolfbox G900 Tripro rear camera only.
• Screws and/or tape included
• Designed and Made in the USA by Americans
• Professionally printed in ASA

The post Protective Cover Mount for Wolfbox Camera G900, G930 (Screw or Adhesive mount) appeared first on Crossroads 3D.

Precision 3D printed mount for Jeep Wrangler JK 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018. Designed specifically for Wolfbox G900, G930, G800, G830, G850 style external rear camera (not included)

Mounts cleanly to the third brake light for optimal high-position view with integrated wire channel.

Key Features

• Secure snap-fit for Wolfbox Cameras (See photos for compatibility)
• Integrated wire channel
• No drilling or modifications – clamps on using included screws
• High mount reduces glare, improves rear visibility for off-road/trail use
• Durable ASA material, professionally printed in the USA
• Easy install: Phillips screwdriver only
• Printed in ASA

Compatibility: All Jeep Wrangler JK and JKU models (2-door/4-door/Unlimited) 2007-2018. Not for JL or other years. Perfect stealth upgrade for dash cam/rear view on your JK or JKU Wrangler.

The post Jeep JK Wrangler Third Brake Light Camera Mount for Wolfbox G8, G9 cameras appeared first on Crossroads 3D.

Precision mount for Jeep Wrangler JL 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025, 2026. Designed specifically for Wolfbox G900, G930, G800, G830, G850 style external rear camera (not included) – mounts cleanly to the third brake light for optimal high-position view with integrated wire channel.

Key Features:

• Secure snap-fit for Wolfbox G8 and G9 style Cameras (See photos for compatibility)
• Integrated wire channel
• No drilling or modifications – clamps on using included screws
• High mount reduces glare, improves rear visibility for off-road/trail use
• Durable ASA material, professionally printed in the USA
• Easy install: Phillips screwdriver only

Compatibility: All Jeep Wrangler JL models (2-door/4-door/Unlimited compatible if third brake light matches) 2018-2026. Not for JK or other years.

Perfect upgrade for Wolfbox dash cam/rearview can on your JL Wrangler.

Questions on fit? Match pictures. Message for confirmation.

The post Jeep JL Wrangler Third Brake Light Mount for Wolfbox Tripro G900 Camera System (2018-2026 JL) appeared first on Crossroads 3D.

Elevate your off-road situational awareness and video capture with the WolfBox g900 Camera Mount, specifically designed for Yamaha RMAX Wolverine SXS vehicles. This sturdy mounting solution ensures your camera stays securely in place while navigating challenging terrain. The mount's thoughtful design allows for optimal positioning to capture your forward view without compromising your vehicle's functionality or driver visibility. Perfect for recording trail rides or getting a good view of close-up treacherous terrain while riding your RMAX 1000. The mount's durable construction stands up to the demands of off-road use while providing stable, vibration-resistant support for your camera equipment. Installation is straightforward, utilizing existing mounting points for a clean, integrated look that complements your vehicle's appearance. Wolfbox camera not included.

• COMPATIBILITY: Specifically designed to mount securely on Yamaha RMAX and Wolverine 1000 models while providing stable Wolfbox g900 camera support (See grille pic to verify fitment. )
• SECURE MOUNTING: Heavy-duty construction ensures your camera stays firmly in place even during rough terrain rides and challenging conditions
• QUICK INSTALLATION: design allows for easy attachment and removal of the mount without permanent modifications to your vehicle. Only tool needed is a Philips screwdriver.
• POSITIONING: The mount is fixed for stability and simple, durable construction, but the Wolfbox G900 cameras are digitally adjustable.
• DURABILITY: Professionally printed from ASA to withstand outdoor elements and maintain stability during even the hottest off-road adventures
• MADE IN THE USA: Designed and made in the USA by a small family business.

The post WolfBox Camera Mount for Yamaha RMAX Wolverine, RMAX-4 appeared first on Crossroads 3D.

Choose your camera type before ordering (see pics)

The Crossroads 3D Camera mount is precision-designed to fit the Wolfbox rear camera (not included.)

• Mount your rear dash camera to the third brake light.
• Secure and precision fit: includes integrated wire channel.
• Fits Wolfbox external cameras (see pictures).
• Attaches to third brake light with no modification or drilling.
• Integrated wire channel
• Designed and Professionally printed in the USA by Americans
• Made in ASA

The post Ford Bronco Third Brake Light Mount for Wolfbox Camera Systems (2021-2026 Bronco) appeared first on Crossroads 3D.

The Crossroads 3D Camera mount is precision-designed to fit the Wolfbox G900 Tripro rear camera (not included.)

• Mount your rear camera to the third brake light using the OEM screws.
• Mount is secure and precision fit, includes integrated wire channel, to run the cord out either side.
• Professionally printed from ABS.
• Fits the Wolfbox G900 Tripro rear camera only.
• Designed and Made in the USA by Americans

The post Wolfbox Camera Mount for Ford F-150 (15-25) – Third Brake Light Mount appeared first on Crossroads 3D.

Truck fitment: Tested with F-150/Raptor and Super Duty 2017+. May fit other years.

For trucks with Rear slider only!

What version should you choose: 
Choose the "With Sunroof (big gap)" if you can get a finger in easily above the rear window and the headliner. The gap would be about about 1/2".
Choose the "Without Sunroof (small gap) if your gap above the rear window is more like 1/8", and poking your finger in there is difficult.

• Mount your rear camera to the rear edge of the headliner, so that the camera sees out the rear windshield.
• Easy, Snap-in installation
• Mount does not interfere with powered rear sliding window
• Mount is secure and precision fit, includes integrated wire channel, to run the cord up into the headliner
• Fits the Wolfbox G900 Tripro rear camera (not included)
• Choose if you have a sunroof (big gap) or no sunroof (small gap) version
• Designed and Made in the USA by Americans
• Professionally printed from ABS.

The post Rear Windshield Headliner Mount for Wolfbox Camera & Ford Pickups w/Rear Sliding Window appeared first on Crossroads 3D.

• Mount your rear camera to the third brake light using the OEM screws.
• Mount is secure and precision fit, includes integrated wire channel, to run the cord out either side.
• Professionally printed from ABS.
• Fits the Wolfbox G900 Tripro rear camera only.
• Designed and Made in the USA by Americans

The post Ford Super Duty / Raptor Third Brake Light Mount for Wolfbox G900 Tripro Camera (17-26 SD, 21-26 Raptor) appeared first on Crossroads 3D.