This adapter mounts a Wolfbox G90 style camera into any existing Baja Designs S1 or S2 flush mount light pod hole (common to light bars, horizontal/vertical tube mounts, universal a-pillar mounts, etc.) Perfect for off-road trucks, Jeeps, UTVs, and custom builds wanting integrated, durable fulltime digital rearview camera placement without new drilling.

● Includes stainless fasteners and dual o-rings for water/dust sealing
● Direct drop-in fit for S1/S2 pod openings
● Ideal for offroad enthusiasts adding front-facing or rock-crawl visibility
● Camera not included (compatible with Wolfbox G900 type camera bodies)
● Hardware: All stainless screws + o-rings included
● Professionally printed in weather-resistant ASA filament
● Designed and made in the USA by Americans

Upgrade your 1999-2016 Super Duty with a clean, professional rear camera installation! This precision 3D-printed mount installs under your third brake light for a factory-like appearance with zero visible wiring.

Fits Ford Super Duty 1999-2016 (F-250, F-350, F-450, F-550 models)

• Designed specifically for Wolfbox G9 series cameras - snaps in securely. Match the photo for fitment.
• Installs using the existing OEM screws
• Integrated hidden wire channel routes power cable cleanly inside the mount
• High mounting position reduces headlight glare and improves rear visibility
• Spacer-style design keeps a low-profile, sleek look on your truck
• Made from durable, UV-resistant ASA plastic - built tough for outdoor use
• Easy 10-15 minute install - perfect for DIYers
• No visible wires or messy adhesive mounts
• Great for backup camera, bed viewing, or towing applications
• Includes Sealant and new OEM gasket for light
• Wolfbox camera and third brake light sold separately
• Proudly Designed and Made in the USA

Give your ford Super Duty the cleanest Wolfbox camera setup possible - hidden wiring, secure fit, and pro-level results.
Message me with any fitment questions.

FITS WolfBox G840, G850 style Camera (match the photos)
The Crossroads 3D Camera mount is precision-designed for the Wolfbox G840, G850 style camera (not included.)

10-degree down angle is a screw mount designed for the Ford Transit High Roof, and has a wire exit underneath the bottom that goes straight down (intended to mount over top of a drilled hole.)

• Mount your Wolfbox camera to any flat surface
• Choose mount type: Screws or automotive molding tape (clean surface before use)
• Mount is precision fit: includes integrated wire channel to run the cord out the back
• Fits the Wolfbox G840, G850 rear camera only.
• Screws and/or tape included
• Designed and Made in the USA by Americans
• Professionally printed in ASA

Wolfbox G900 Rear Camera High-Mount Pod - 12° degree Down Angle, Sleek Weather Cover

Mount your Wolfbox rear camera high up on flat surfaces like camper roofs, trailer tops, or high-roof van exteriors with this angled adhesive pod. The built-in 12-degree downward tilt provides optimal rear viewing without awkward adjustments—perfect for elevated installations where a level mount would point too high.

• Designed for Wolfbox G900, G900 Pro, G900 Tripro, and similar rear camera models (check photos for match)
• 12° built-in down angle ideal for high placements on campers, travel trailers, fifth wheels, or roof-mounted setups
• Sleek protective cover shields the camera from rain, dust, UV, and road debris for reliable all-weather performance
• Choose from stainless screw or automotive-grade adhesive mounting for secure mounting on metal, fiberglass, or composite surfaces
• Wire exit options: choose bottom cable exit or rear exit when ordering
• Durable, weather-resistant construction holds up in outdoor vehicle environments
• Easy install: snap in camera, install base plate, and install. (Camera NOT included – mount and cover only)
• Proudly designed and made in the USA by Americans

Great for high-roof cargo vans like Ford Transit (including high-roof models), Mercedes-Benz Sprinter (high-roof), Ram ProMaster (high-roof), and similar setups where you need downward-angled rear visibility from elevated positions.

Not sure if it fits your setup? Message me with your vehicle details or a photo—I'll confirm compatibility fast!

Ford F-150 (2009-2014) Third Brake Light (3-Bulb) Camera Mount for Wolfbox G900 Tripro – Hidden Wiring, No Visible Cables

Precision spacer mount installs under your Ford F-150's third brake light (high mount brake light) for a clean, professional Wolfbox rear camera setup. Designed specifically for the Wolfbox G900 (camera not included) – snaps in perfectly with zero visible wiring.

Note that this works with the 3-bulb variant only. If your light has only two bulbs, then this will not fit.

Key Benefits:

● **Does not fit the LED version from those years
● High position reduces road glare from headlights for clearer footage
● Low-profile spacer fits underneath the OEM third brake light using factory screws
● Includes rubber weather seals on both sides (essential for 2009-2014 trucks with aged seals)
● Easy DIY install: Phillips #1 and #2 screwdrivers only
● Weatherproof RTV seal included for secure mounting
● Made in the USA from durable ASA material, professionally 3D printed

Compatibility: Fits all Ford F-150 models 2009, 2010, 2011, 2012, 2013, 2014 (does not fit SVT Raptor or models with hill descent control if applicable – confirm your setup).
No drilling, no exposed wires – perfect for a stealth dash cam / rear view camera upgrade on your F-150 truck.

[FITS: "cube" style rearview camera (Must match the photos)]
The Crossroads 3D Camera mount is precision-designed to fit common rearview backup/license plate cameras (Example)

The camera snaps into the protective cover securely. Top hole is for camera removal.

• Mount your rearview backup camera to any flat surface
• Choose between adhesive mount or screw mount
• Mount is secure and precision fit: includes integrated wire channel to run the cord out the back
• Fits the displayed camera type only
• All fasteners included
• Top hole is for camera removal
• Designed and Made in the USA by Americans
• Professionally printed in ASA

Precision camera mount designed to attach under your factory third brake light for a clean, low-profile install with zero visible wiring. Revised and expanded version with broader compatibility across Ford trucks.

FEATURES:

• Specifically designed for Wolfbox G900 rear camera (camera not included)
• Hidden wiring channel routes cable out either side for clean factory look
• High mount position reduces headlight glare and improves bed visibility
• Includes weather seal and uses OEM mounting screws for secure install
• Made in USA from durable ASA thermoplastic
• Easy DIY install with Phillips screwdrivers

FITMENT: Without OEM Cargo Camera

• 2015–2020 Ford F-150 (all trims)
• 2021+ Ford F-150 (non-Raptor, no factory cargo camera)
• 2017–2026 Ford Super Duty (F-250 / F-350 / F-450 / F-550, no factory cargo camera)
• 2022–2026 Ford Maverick (all trims, no factory cargo camera)

FITMENT: With OEM Cargo Camera (includes Raptor)

• 2017–2026 Ford Super Duty (F-250 / F-350 / F-450 / F-550, with factory cargo bed camera)
• 2021+ Ford F-150 (non-Raptor, with factory cargo bed camera)
• 2021+ Ford F-150 Raptor (all years, with factory cargo bed camera)

PAINT OPTION includes professional hand finish, primer, paint, & clearcoat. Contact us with your color code/details. Some paint can cost more depending on color complexity.

Select the correct variation based on your truck's third brake light: "Without OEM Camera" or "With OEM Camera / Raptor". Verify your build has (or lacks) the factory cargo camera before ordering.

FITS WolfBox G900 style Camera (match the photos)
The Crossroads 3D Camera mount is precision-designed for the Wolfbox G900 / G930 style camera (not included.)

10-degree down angle is a screw mount designed for the Ford Transit High Roof, and has a wire exit underneath the bottom that goes straight down (intended to mount over top of a drilled hole.)

• Mount your G900 camera to any flat surface
• Choose mount type: Screws or automotive molding tape (clean surface before use)
• Choose finish type: none (black) or pro auto paint.
• Mount is precision fit: includes integrated wire channel to run the cord out the back
• Fits the Wolfbox G900 Tripro rear camera only.
• Screws and/or tape included
• Designed and Made in the USA by Americans
• Professionally printed in ASA

[FITS 2023-2025 Super Duty Pickups]
Crossroads 3D switch panel mount for Ford Super Duty trucks (5th Gen, 2023-2025) mounts the Feniex 4200 powered mini controller. It's a great accessory to add these controller switches to the truck.

• Precision fit: The Crossroads panel slides into the existing driver's side pocket in the truck
• Switch Mount: fits Feniex Industries 4200 Mini Controller
• Secure: The switch panel is designed to securely hold your Feniex Mini Controller. Includes slots on the sides to add strip of 3M double-sided molding tape if even more stability is desired.
• Easy installation: The switch panel is easy to install and requires no tools or modifications. It simply slips into the existing console pocket and can be used immediately.
• Cup holder: The cup holder adds a spot for your 20oz or 30oz tumbler to the driver's side (Yeti and similar)
• Pockets: Includes mini pass-through pockets for storing pens, pencils, lighter, etc.
• Made in the USA: This panel is designed and professionally 3D printed in the United States by Americans.

Feniex Industries 4200 Mini Controller can be found here. (Not included)

[FITS BRONCO, 2021-2026]
Verify your camera type before ordering (see pics)

The Crossroads 3D Camera mount is precision-designed to fit the Wolfbox rear camera (not included.)

• Mount your rear dash camera to the third brake light.
• Secure and precision fit: includes integrated wire channel.
• Fits Wolfbox external cameras (see pictures).
• Attaches to third brake light with no modification or drilling.
• Integrated wire channel
• Designed and Professionally printed in the USA by Americans
• Made in ASA

[CHECK PICTURE FOR PROPER INTERIOR (2017-2022)]

Crossroads 3D Console Tray Organizer for Ford Super Duty, F-250, F-250 (2017-2022) pickups adds convenience to the driver's side pocket in the console. This tray fits into the existing center-console driver's side pocket, and is precision-designed to fit tight.

* NOTE: Does not work with console-shifter pickups.

• Holds both large or small energy drink cans and common tumbled (Yeti, etc)
• Depth: pockets are 1 5/8" deep.
• Precision fit: The Crossroads organizer tray slides into the existing driver's side console pocket of the Ford F-150
• Multi-capacity: The tray holds business cards, pens and pencils, hand sanitizer, and more
• Color Options: Choose from Solid Black, Silver top edge, or any other custom color (leave an order note)
• Secure: The tray is designed to securely fit into place, preventing it from moving or rattling.
• Easy installation: The organizer tray is simple to install and requires no tools or truck modifications. It simply slips into the existing pocket and can be used immediately.
• Made in the USA: This organizer tray is designed and professionally 3D printed in the United States.

[CHECK PICTURE FOR PROPER INTERIOR (2023-2025)]

Crossroads 3D Cupholder and Caddy Tray Organizer for Ford Super Duty, F-250, F-250 (2023-2025) pickups adds convenience to the driver's side pocket in the console.

This tray fits into the existing center-console driver's side pocket, and is precision-designed for a perfect fit.

* NOTE: Does not work with console-shifter pickups.

• Holds standard taper-bottom tumbles like YETI, etc.
• Depth: pockets are 1 3/4" deep.
• Precision fit: The Crossroads organizer tray slides into the existing driver's side console pocket of the Ford F-150. The OEM slider does slide over top of the tray.
• Multi-capacity: The tray holds phones, business cards, pens and pencils, hand sanitizer, and more
• Secure: The tray is designed to securely fit into place, preventing it from moving or rattling.
• Easy installation: The organizer tray is simple to install and requires no tools or truck modifications. It simply slips into the existing pocket and can be used immediately.
• Made in the USA: This organizer tray is designed and professionally 3D printed in the United States.

[CHECK PICTURE FOR PROPER INTERIOR (2023-2025)]

Crossroads 3D Cupholder and Caddy Tray Organizer for Ford Super Duty, F-250, F-250 (2023-2025) pickups adds convenience to the driver's side pocket in the console.

Includes deep pass-through angled slot for pistol and holster carry, with handle angled towards the driver.

This tray fits into the existing center-console driver's side pocket, and is precision-designed for a perfect fit.

* NOTE: Does not work with console-shifter pickups.

• Holds standard taper-bottom tumbles like YETI, etc.
• Depth: pockets are 1 3/4" deep.
• Precision fit: The Crossroads organizer tray slides into the existing driver's side console pocket of the Ford F-150. The OEM slider does slide over top of the tray.
• Multi-capacity: The tray holds guns, phones, business cards, pens and pencils, hand sanitizer, and more
• Secure: The tray is designed to securely fit into place, preventing it from moving or rattling.
• Easy installation: The organizer tray is simple to install and requires no tools or truck modifications. It simply slips into the existing pocket and can be used immediately.
• Made in the USA: This organizer tray is designed and professionally 3D printed in the United States.

[CHECK PICTURE FOR PROPER OEM BUMPER STYLE, 2021-2025]
The Crossroads 3D bumper grille is intended to "finish off" the look of the center hole in the OEM bumpers.

• Easy Installation: The center grille fastens with screws (included)
• Stylish: The grille sets off your truck with Ford's OEM style grid
• Durable: Tested off-road and in car washes, the grille is designed to securely fasten into place with 4 screws, preventing it from falling out during normal use.
• Made in the USA: Designed and professionally 3D printed in Indiana

The Crossroads 3D Camera mount is precision-designed to fit the Wolfbox G900 Tripro rear camera (not included.)

Truck fitment: Tested with F-150/Raptor and Super Duty 2017+. May fit other years.

For trucks with Rear slider only!

What version should you choose: 
Choose the "With Sunroof (big gap)" if you can get a finger in easily above the rear window and the headliner. The gap would be about about 1/2".
Choose the "Without Sunroof (small gap) if your gap above the rear window is more like 1/8", and poking your finger in there is difficult.

• Mount your rear camera to the rear edge of the headliner, so that the camera sees out the rear windshield.
• Easy, Snap-in installation
• Mount does not interfere with powered rear sliding window
• Mount is secure and precision fit, includes integrated wire channel, to run the cord up into the headliner
• Fits the Wolfbox G900 Tripro rear camera (not included)
• Choose if you have a sunroof (big gap) or no sunroof (small gap) version
• Designed and Made in the USA by Americans
• Professionally printed from ABS.

[CHECK PICTURE FOR PROPER INTERIOR (2023-2025)]

Crossroads 3D Console Tray Organizer for Ford Super Duty, F-250, F-250 (2023-2025) pickups adds convenience to the driver's side pocket in the console.

This tray fits into the existing center-console driver's side pocket, and is designed to be durable and fit tightly.

* NOTE: Does not work with console-shifter pickups.

• Holds both large or small energy drink cans
• Depth: pockets are 1 7/8" deep.
• Precision fit: The Crossroads organizer tray slides into the existing driver's side console pocket of the Ford F-150
• Multi-capacity: The tray holds business cards, pens and pencils, hand sanitizer, and more
• Color Options: Choose from Solid Black, Silver top edge, or any other custom color (leave an order note)
• Secure: The tray is designed to securely fit into place, preventing it from moving or rattling.
• Easy installation: The organizer tray is simple to install and requires no tools or truck modifications. It simply slips into the existing pocket and can be used immediately.
• Made in the USA: This organizer tray is designed and professionally 3D printed in the United States.