Pioneer 500 Archives - Crossroads 3D https://crossroads3d.com/product-category/pioneer-500/ Custom automotive and motorsports products Fri, 27 Mar 2026 03:10:40 +0000 en-US hourly 1 https://wordpress.org/?v=7.0 https://crossroads3d.com/wp-content/uploads/2018/01/cropped-cr3dlogo-2-32x32.png Pioneer 500 Archives - Crossroads 3D https://crossroads3d.com/product-category/pioneer-500/ 32 32 12-Gang Overhead-Mounted Switch Panel https://crossroads3d.com/product/12-gang-overhead-mounted-switch-panel/ https://crossroads3d.com/product/12-gang-overhead-mounted-switch-panel/#respond Tue, 16 Dec 2025 18:42:51 +0000 https://crossroads3d.com/?post_type=product&p=19744 This roll-bar-mounted switch panel holds 12 standard sized rocker switches. The whole mount is 12 3/4" wide.

  • All 4 clamps included for rear or top-mount

The post 12-Gang Overhead-Mounted Switch Panel appeared first on Crossroads 3D.

]]>
12-Gang Overhead-Mounted Switch Panel
12-Gang Overhead-Mounted Switch Panel - Image 2
12-Gang Overhead-Mounted Switch Panel - Image 3
12-Gang Overhead-Mounted Switch Panel - Image 4

12-Gang Overhead-Mounted Switch Panel

$149.95

SKU: OHPanel12 Categories: , , , , , , , , Tags: , , , , , , , , , , , , , ,

This roll-bar-mounted switch panel holds 12 standard sized rocker switches. The whole mount is 12 3/4″ wide.

  • All 4 clamps included for rear or top-mount

Check out the other sizes:

Electronics Not Included

FITMENT: use the guide above to see what size to order. Please measure the diameter of your cross-bar to be certain.

Fits the following side by sides:

  • ARCTIC CAT Wildcat / Wildcat 4: 1.75″
  • CAN-AM Maverick and Maverick 4 seat: 2.0”
  • CAN-AM  averick X3: 1.85″
  • CAN-AM Commander: 2.0”
  • HONDA Pioneer 1000: 1.75”
  • HONDA Pioneer 700: 1.625”
  • HONDA Pioneer 500: 1.625”
  • HONDA Big Red: 1.625”
  • HONDA Talon: 2″
  • KAWASAKI Teryx / Teryx 4 Top crossbars: 1.7”
  • POLARIS RZR 170: 1.25″
  • POLARIS XP1000 and XP4 1000: 1.75”
  • POLARIS XP Turbo and XP4 Turbo: 1.75”
  • POLARIS RZR 900 2015 and up: 1.75”
  • POLARIS RZR 570: 1.75”
  • YAMAHA YXZ Top crossbars: 1.5”
  • YAMAHA Rhino Top crossbars: 1.5”
  • YAMAHA Viking and Viking 6 seater: 2.0”
  • YAMAHA Wolverine Top crossbars: 1.5”
  • JEEP: 2.25″

The post 12-Gang Overhead-Mounted Switch Panel appeared first on Crossroads 3D.

]]> https://crossroads3d.com/product/12-gang-overhead-mounted-switch-panel/feed/ 0 Bar Mount for 5-Gang Pre-Wired Switch Panel https://crossroads3d.com/product/bar-mount-for-5-gang-pre-wired-switch-panel/ https://crossroads3d.com/product/bar-mount-for-5-gang-pre-wired-switch-panel/#respond Wed, 16 Jul 2025 19:07:37 +0000 https://crossroads3d.com/?post_type=product&p=18772 This roll-bar-mounted switch panel pairs up with 5-Gang pre-wired switch panels, like the "FXC" or "Nilight" brand panels and others.

  • Convenient location
    Place your switches overhead on the bar.
    Top-mounted units are "ambidextrous" - you can mount your switches over or under the bar, forward, or rearward (toward or away from your face.)
    Rear-mount option available for when vertical space is a premium
  • No cutting or drilling
    No chopping up of your dash!
  • Easy install
    Installation is simple and uses a Phillips screwdriver.
  • Features
  • Large side hatch to fit pre-wired kits with large quick-connect plugs

The post Bar Mount for 5-Gang Pre-Wired Switch Panel appeared first on Crossroads 3D.

]]>
Bar Mount for 5-Gang Pre-Wired Switch Panel
Bar Mount for 5-Gang Pre-Wired Switch Panel - Image 2
Bar Mount for 5-Gang Pre-Wired Switch Panel - Image 3

Bar Mount for 5-Gang Pre-Wired Switch Panel

$49.95

SKU: PWP-5G Categories: , , , , , , , , Tags: , , , , , , , , , , , , , , , ,

This roll-bar-mounted switch panel pairs up with 5-Gang pre-wired switch panels, like the “FXC” or “Nilight” brand panels and others.

  • Convenient location
    Place your switches overhead on the bar.
    Top-mounted units are “ambidextrous” – you can mount your switches over or under the bar, forward, or rearward (toward or away from your face.)
    Rear-mount option available for when vertical space is a premium
  • No cutting or drilling
    No chopping up of your dash!
  • Easy install
    Installation is simple and uses a Phillips screwdriver.
  • Features
  • Large side hatch to fit pre-wired kits with large quick-connect plugs

Electronics Not Included

FITMENT: use the guide above to see what size to order. Please measure the diameter of your cross-bar to be certain.
Fits the following side by sides:

  • ARCTIC CAT Wildcat / Wildcat 4: 1.75″
  • CAN-AM Maverick and Maverick 4 seat: 2.0”
  • CAN-AM Maverick X3: 1.85″
  • CAN-AM Commander: 2.0”
  • HONDA Pioneer 1000: 1.75”
  • HONDA Pioneer 700: 1.625”
  • HONDA Pioneer 500: 1.625”
  • HONDA Big Red: 1.625”
  • HONDA Talon: 2″
  • KAWASAKI Teryx / Teryx 4 Top crossbars: 1.7”
  • POLARIS RZR 170: 1.25″
  • POLARIS XP1000 and XP4 1000: 1.75”
  • POLARIS XP Turbo and XP4 Turbo: 1.75”
  • POLARIS RZR 900 2015 and up: 1.75”
  • POLARIS RZR 570: 1.75”
  • YAMAHA YXZ Top crossbars: 1.5”
  • YAMAHA Rhino Top crossbars: 1.5”
  • YAMAHA Viking and Viking 6 seater: 2.0”
  • YAMAHA Wolverine Top crossbars: 1.5”
  • JEEP (many have 2.25″ roll bars)

The post Bar Mount for 5-Gang Pre-Wired Switch Panel appeared first on Crossroads 3D.

]]> https://crossroads3d.com/product/bar-mount-for-5-gang-pre-wired-switch-panel/feed/ 0 MapD CCD G2 Roll Bar Mount https://crossroads3d.com/product/mapd-ccd-g2-roll-bar-mount/ https://crossroads3d.com/product/mapd-ccd-g2-roll-bar-mount/#respond Thu, 22 May 2025 20:56:15 +0000 https://crossroads3d.com/?post_type=product&p=18360 This roll-bar-mount is designed for the MapD CCS G2 Motorsport DCCD controller module. (Not included)

  • Mounts the MapDCCD G2 to any round bar
  • Choose your bar clamp size when ordering
  • Includes all installation hardware
  • Professionally 3D Printed in ABS
  • Designed and made in the USA

The post MapD CCD G2 Roll Bar Mount appeared first on Crossroads 3D.

]]>
MapD CCD G2 Roll Bar Mount
MapD CCD G2 Roll Bar Mount - Image 2
MapD CCD G2 Roll Bar Mount - Image 3

MapD CCD G2 Roll Bar Mount

Price range: $48.95 through $52.95

SKU: MAPDG2 Categories: , , , , , , , , Tags: , , , , , , , ,
  • This roll-bar-mount is designed for the MapD CCS G2 Motorsport DCCD controller module. (Not included)
    • Mounts the MapDCCD G2 to any round bar
    • Choose your bar clamp size when ordering
    • Includes all installation hardware
    • Professionally 3D Printed in ABS
    • Designed and made in the USA

Electronics Not Included

FITMENT: use the guide to see what size to order. Please measure the diameter of your bar to be certain.

Fits the following side by sides:

  • ARCTIC CAT Wildcat / Wildcat 4: 1.75″
  • CAN-AM Maverick and Maverick 4 seat: 2.0”
  • CAN-AM Maverick X3: 1.85″
  • CAN-AM Commander: 2.0”
  • HONDA Pioneer 1000: 1.75”
  • HONDA Pioneer 700: 1.625”
  • HONDA Pioneer 500: 1.625”
  • HONDA Big Red: 1.625”
  • HONDA Talon: 2″
  • KAWASAKI Teryx / Teryx 4 Top crossbars: 1.7”
  • POLARIS RZR 170: 1.25″
  • POLARIS XP1000 and XP4 1000: 1.75”
  • POLARIS XP Turbo and XP4 Turbo: 1.75”
  • POLARIS RZR 900 2015 and up: 1.75”
  • POLARIS RZR 570: 1.75”
  • YAMAHA YXZ Top crossbars: 1.5”
  • YAMAHA Rhino Top crossbars: 1.5”
  • YAMAHA Viking and Viking 6 seater: 2.0”
  • YAMAHA Wolverine Top crossbars: 1.5”
  • JEEP (many have 2.25″ roll bars)

The post MapD CCD G2 Roll Bar Mount appeared first on Crossroads 3D.

]]> https://crossroads3d.com/product/mapd-ccd-g2-roll-bar-mount/feed/ 0 Roll-Bar Mount for 3″ Marine Radios https://crossroads3d.com/product/roll-bar-mount-for-3-marine-radios/ https://crossroads3d.com/product/roll-bar-mount-for-3-marine-radios/#respond Thu, 01 May 2025 19:27:51 +0000 https://crossroads3d.com/?post_type=product&p=18234 This roll-bar-mount is designed for common "marine" type radios with 3-inch diameter mount holes. Install it on your boat, SXS, OHV, Jeep, or onto any other round bar. Includes all fasteners and rubber wiring grommet.

  • Convenient location
    Place your radio overhead on the roll bar. Rotate the clamp to position the radio forward or rearward.
  • Designed to fit
    Bar clamps are precision for your bar, no shims necessary. Angled back for use with SXS windshields
  • No cutting or drilling
    No chopping up of your dash!
  • Easy install
    Installation is simple and uses Phillips screwdrivers
  • Attractive and Durable
    This product is professionally 3D printed in ABS.
  • Customizable
    If you need a mount for another bar size, or other combination of switches and circle-holes, or any other powered panel type or brand, contact me.

Example radios that this will fit:

The post Roll-Bar Mount for 3″ Marine Radios appeared first on Crossroads 3D.

]]>
Roll-Bar Mount for 3" Marine Radios
Roll-Bar Mount for 3" Marine Radios - Image 2
Roll-Bar Mount for 3" Marine Radios - Image 3
Roll-Bar Mount for 3" Marine Radios - Image 4
Roll-Bar Mount for 3" Marine Radios - Image 5

Roll-Bar Mount for 3″ Marine Radios

(1 customer review)

Price range: $64.95 through $68.95

SKU: PWPsPOD6-1 Categories: , , , , , , , , Tags: , , , , , ,
This roll-bar-mount is designed for the sPOD SourceLT Modular Universal panel.

  • Convenient location
    Place your switches overhead on the bar. This unit is “ambidextrous:” you can mount your switches over or under the bar, forward, or rearward (toward or away from your face.)
  • No cutting or drilling
    No chopping up of your dash!
  • Easy install
    Installation is simple and uses a Phillips screwdriver.
  • Attractive and Durable
    This switch panel won’t warp in the heat – the material used has similar characteristics as the factory plastic in your machine. This product is professionally 3D printed in ABS.
  • Customizable
    If you need a switch panel for another bar size, or other combination of switches and circle-holes, or any other powered panel type or brand, contact me.

The sPOD SourceLT Universal Switch Panel panel can be purchased here.

Check out the other sizes:

Electronics Not Included

FITMENT: use the guide above to see what size to order. Please measure the diameter of your cross-bar to be certain.
Fits the following side by sides:

  • ARCTIC CAT Wildcat / Wildcat 4: 1.75″
  • CAN-AM Maverick and Maverick 4 seat: 2.0”
  • CAN-AM Maverick X3: 1.85″
  • CAN-AM Commander: 2.0”
  • HONDA Pioneer 1000: 1.75”
  • HONDA Pioneer 700: 1.625”
  • HONDA Pioneer 500: 1.625”
  • HONDA Big Red: 1.625”
  • HONDA Talon: 2″
  • KAWASAKI Teryx / Teryx 4 Top crossbars: 1.7”
  • POLARIS RZR 170: 1.25″
  • POLARIS XP1000 and XP4 1000: 1.75”
  • POLARIS XP Turbo and XP4 Turbo: 1.75”
  • POLARIS RZR 900 2015 and up: 1.75”
  • POLARIS RZR 570: 1.75”
  • YAMAHA YXZ Top crossbars: 1.5”
  • YAMAHA Rhino Top crossbars: 1.5”
  • YAMAHA Viking and Viking 6 seater: 2.0”
  • YAMAHA Wolverine Top crossbars: 1.5”
  • JEEP (many have 2.25″ roll bars)

The post Roll-Bar Mount for 3″ Marine Radios appeared first on Crossroads 3D.

]]> https://crossroads3d.com/product/roll-bar-mount-for-3-marine-radios/feed/ 0 Bar Mount for 4-Gang Pre-Wired Switch Panel [Rear Mount] https://crossroads3d.com/product/bar-mount-for-4-gang-pre-wired-switch-panel-rear-mount/ https://crossroads3d.com/product/bar-mount-for-4-gang-pre-wired-switch-panel-rear-mount/#respond Mon, 04 Mar 2024 23:31:04 +0000 https://crossroads3d.com/?post_type=product&p=15728 This roll-bar-mounted switch panel pairs up with 4-Gang pre-wired switch panel, like the "FXC" brand and others. (available here).

3/4" wire exit hole on the right (passenger) side with larger cover for quick disconnect plugs.

  • Convenient location
    Place your switches overhead on the bar. This unit is rear mounted for situations where there is limited vertical space.
  • No cutting or drilling
    No chopping up of your dash!
  • Easy install
    Installation is simple and uses a Phillips screwdriver.
  • Box dimensions:
    5" wide, 3.5" deep, 2 7/8" high.

The post Bar Mount for 4-Gang Pre-Wired Switch Panel [Rear Mount] appeared first on Crossroads 3D.

]]>
Bar Mount for 4-Gang Pre-Wired Switch Panel [Rear Mount]
Bar Mount for 4-Gang Pre-Wired Switch Panel [Rear Mount] - Image 2
Bar Mount for 4-Gang Pre-Wired Switch Panel [Rear Mount] - Image 3
Bar Mount for 4-Gang Pre-Wired Switch Panel [Rear Mount] - Image 4
SKU: PWP4GRM Categories: , , , , , , , , Tags: , , , , , , , , , , , , , , , ,

Bar Mount for 4-Gang Pre-Wired Switch Panel [Rear Mount]

(1 customer review)

$54.95

This roll-bar-mounted switch panel pairs up with 4-Gang pre-wired switch panel, like the “FXC” brand and others. (available here).

3/4″ wire exit hole on the right (passenger) side with larger cover for quick disconnect plugs.

  • Convenient location
    Place your switches overhead on the bar. This unit is rear mounted for situations where there is limited vertical space.
  • No cutting or drilling
    No chopping up of your dash!
  • Easy install
    Installation is simple and uses a Phillips screwdriver.
  • Box dimensions:
    5″ wide, 3.5″ deep, 2 7/8″ high.

Electronics Not Included

FITMENT: use the guide above to see what size to order. Please measure the diameter of your cross-bar to be certain.

Fits the following side by sides:

  • ARCTIC CAT Wildcat / Wildcat 4: 1.75″
  • CAN-AM Maverick and Maverick 4 seat: 2.0”
  • CAN-AM Maverick X3: 1.85″
  • CAN-AM Commander: 2.0”
  • HONDA Pioneer 1000: 1.75”
  • HONDA Pioneer 700: 1.625”
  • HONDA Pioneer 500: 1.625”
  • HONDA Big Red: 1.625”
  • HONDA Talon: 2″
  • KAWASAKI Teryx / Teryx 4 Top crossbars: 1.7”
  • POLARIS RZR 170: 1.25″
  • POLARIS XP1000 and XP4 1000: 1.75”
  • POLARIS XP Turbo and XP4 Turbo: 1.75”
  • POLARIS RZR 900 2015 and up: 1.75”
  • POLARIS RZR 570: 1.75”
  • YAMAHA YXZ Top crossbars: 1.5”
  • YAMAHA Rhino Top crossbars: 1.5”
  • YAMAHA Viking and Viking 6 seater: 2.0”
  • YAMAHA Wolverine Top crossbars: 1.5”
  • JEEP (many have 2.25″ roll bars)

The post Bar Mount for 4-Gang Pre-Wired Switch Panel [Rear Mount] appeared first on Crossroads 3D.

]]> https://crossroads3d.com/product/bar-mount-for-4-gang-pre-wired-switch-panel-rear-mount/feed/ 0 Bar Mount for Switch-Pros RCR-12 Powered Switch Panel https://crossroads3d.com/product/bar-mount-for-switch-pros-rcr-12-powered-switch-panel/ https://crossroads3d.com/product/bar-mount-for-switch-pros-rcr-12-powered-switch-panel/#respond Tue, 21 Nov 2023 17:41:56 +0000 https://crossroads3d.com/?post_type=product&p=14826 This bar mount for the Switch-Pros RCR-12 12-button powered switch panel. It gives you a secure mount on any round bar.

Works with or without the Switch-Pros face bezel.

  • Convenient location
    Mount your RCR-12 overhead on the bar. You can mount your panel over or under the bar, forward, or rearward (toward or away from your face.)
  • No cutting or drilling
    No chopping up of your dash!
  • Easy install
    Installation is simple and uses a Phillips screwdriver.
  • Attractive and Durable
    This product is professionally 3D printed.
  • Customizable
    If you need a switch panel for another bar size, contact me.

The post Bar Mount for Switch-Pros RCR-12 Powered Switch Panel appeared first on Crossroads 3D.

]]>
Bar Mount for Switch-Pros RCR-12 Powered Switch Panel
Bar Mount for Switch-Pros RCR-12 Powered Switch Panel - Image 2
Bar Mount for Switch-Pros RCR-12 Powered Switch Panel - Image 3
Bar Mount for Switch-Pros RCR-12 Powered Switch Panel - Image 4
Bar Mount for Switch-Pros RCR-12 Powered Switch Panel - Image 5
Bar Mount for Switch-Pros RCR-12 Powered Switch Panel - Image 6
Bar Mount for Switch-Pros RCR-12 Powered Switch Panel - Image 7

Bar Mount for Switch-Pros RCR-12 Powered Switch Panel

(1 customer review)

$36.95

Electronics Not Included

SKU: PWPSP12 Categories: , , , , , , , , Tags: , , , , , , , , , , , , , , , , , , , ,

This bar mount for the Switch-Pros RCR-12 12-button powered switch panel. It gives you a secure mount on any round bar.

Works with or without the Switch-Pros face bezel. 

  • Convenient location
    Mount your RCR-12 overhead on the bar. You can mount your panel over or under the bar, forward, or rearward (toward or away from your face.)
  • No cutting or drilling
    No chopping up of your dash!
  • Easy install
    Installation is simple and uses a Phillips screwdriver.
  • Attractive and Durable
    This product is professionally 3D printed.
  • Customizable
    If you need a switch panel for another bar size, contact me.

Check out the other sizes:

Assembly Instruction:

FITMENT: use the guide above to see what size to order. Please measure the diameter of your cross-bar to be certain.

Fits the following side by sides:

  • ARCTIC CAT Wildcat / Wildcat 4: 1.75″
  • CAN-AM Maverick and Maverick 4 seat: 2.0”
  • CAN-AM  averick X3: 1.85″
  • CAN-AM Commander: 2.0”
  • HONDA Pioneer 1000: 1.75”
  • HONDA Pioneer 700: 1.625”
  • HONDA Pioneer 500: 1.625”
  • HONDA Big Red: 1.625”
  • HONDA Talon: 2″
  • KAWASAKI Teryx / Teryx 4 Top crossbars: 1.7”
  • POLARIS RZR 170: 1.25″
  • POLARIS XP1000 and XP4 1000: 1.75”
  • POLARIS XP Turbo and XP4 Turbo: 1.75”
  • POLARIS RZR 900 2015 and up: 1.75”
  • POLARIS RZR 570: 1.75”
  • YAMAHA YXZ Top crossbars: 1.5”
  • YAMAHA Rhino Top crossbars: 1.5”
  • YAMAHA Viking and Viking 6 seater: 2.0”
  • YAMAHA Wolverine Top crossbars: 1.5”
  • JEEP (many have a 2.25″ bar)

The post Bar Mount for Switch-Pros RCR-12 Powered Switch Panel appeared first on Crossroads 3D.

]]> https://crossroads3d.com/product/bar-mount-for-switch-pros-rcr-12-powered-switch-panel/feed/ 0 Bar Mount for Switch-Pro 9100 and Additional Custom Slot https://crossroads3d.com/product/bar-mount-for-switch-pro-9100-and-additional-custom-slot/ https://crossroads3d.com/product/bar-mount-for-switch-pro-9100-and-additional-custom-slot/#respond Tue, 07 Nov 2023 17:08:29 +0000 https://crossroads3d.com/?post_type=product&p=14606 This roll-bar-mounted switch panel pairs up with a Switch-Pro SP 9100 8-Gang pre-wired switch panel plus another hole or slot of your choice to the side. (Contact me for your customization needs.)

  • Convenient location
    Place your switches overhead on the bar. This unit is "ambidextrous:" you can mount your switches over or under the bar, forward, or rearward (toward or away from your face.)
  • No cutting or drilling
    No chopping up of your dash!
  • Easy install
    Installation is simple and uses a Phillips screwdriver.

The post Bar Mount for Switch-Pro 9100 and Additional Custom Slot appeared first on Crossroads 3D.

]]>
Bar Mount for Switch-Pro 9100 and Additional Custom Slot
Bar Mount for Switch-Pro 9100 and Additional Custom Slot - Image 2
Bar Mount for Switch-Pro 9100 and Additional Custom Slot - Image 3
Bar Mount for Switch-Pro 9100 and Additional Custom Slot - Image 4

Bar Mount for Switch-Pro 9100 and Additional Custom Slot

(1 customer review)

$65.95

SKU: PWPSP9+ Categories: , , , , , , , , Tags: , , , , , , , , , , , , , , , , , , , ,

This roll-bar-mounted switch panel pairs up with a Switch-Pro SP 9100 8-Gang pre-wired switch panel plus another hole or slot of your choice to the side. (Contact me for your customization needs.)

  • Convenient location
    Place your switches overhead on the bar. This unit is “ambidextrous:” you can mount your switches over or under the bar, forward, or rearward (toward or away from your face.)
  • No cutting or drilling
    No chopping up of your dash!
  • Easy install
    Installation is simple and uses a Phillips screwdriver.

Electronics Not Included

FITMENT: use the guide above to see what size to order. Please measure the diameter of your cross-bar to be certain.
Fits the following side by sides:

  • ARCTIC CAT Wildcat / Wildcat 4: 1.75″
  • CAN-AM Maverick and Maverick 4 seat: 2.0”
  • CAN-AM Maverick X3: 1.85″
  • CAN-AM Commander: 2.0”
  • HONDA Pioneer 1000: 1.75”
  • HONDA Pioneer 700: 1.625”
  • HONDA Pioneer 500: 1.625”
  • HONDA Big Red: 1.625”
  • HONDA Talon: 2″
  • KAWASAKI Teryx / Teryx 4 Top crossbars: 1.7”
  • POLARIS RZR 170: 1.25″
  • POLARIS XP1000 and XP4 1000: 1.75”
  • POLARIS XP Turbo and XP4 Turbo: 1.75”
  • POLARIS RZR 900 2015 and up: 1.75”
  • POLARIS RZR 570: 1.75”
  • YAMAHA YXZ Top crossbars: 1.5”
  • YAMAHA Rhino Top crossbars: 1.5”
  • YAMAHA Viking and Viking 6 seater: 2.0”
  • YAMAHA Wolverine Top crossbars: 1.5”
  • JEEP (many have 2.25″ roll bars)

The post Bar Mount for Switch-Pro 9100 and Additional Custom Slot appeared first on Crossroads 3D.

]]> https://crossroads3d.com/product/bar-mount-for-switch-pro-9100-and-additional-custom-slot/feed/ 0 Roll-Bar Mount for sPOD SourceLT 6-Gang Switch Panel https://crossroads3d.com/product/roll-bar-mount-for-spod-sourcelt-6-gang-switch-panel/ https://crossroads3d.com/product/roll-bar-mount-for-spod-sourcelt-6-gang-switch-panel/#respond Thu, 13 Jul 2023 17:40:29 +0000 https://crossroads3d.com/?post_type=product&p=13662 This roll-bar-mount is designed for the sPOD SourceLT Modular Universal panel.

  • Convenient location
    Place your switches overhead on the bar. This unit is "ambidextrous:" you can mount your switches over or under the bar, forward, or rearward (toward or away from your face.)
  • No cutting or drilling
    No chopping up of your dash!
  • Easy install
    Installation is simple and uses a Phillips screwdriver.
  • Attractive and Durable
    This switch panel won't warp in the heat - the material used has similar characteristics as the factory plastic in your machine. This product is professionally 3D printed in ABS.
  • Customizable
    If you need a switch panel for another bar size, or other combination of switches and circle-holes, or any other powered panel type or brand, contact me.

The sPOD SourceLT Universal Switch Panel panel can be purchased here.

The post Roll-Bar Mount for sPOD SourceLT 6-Gang Switch Panel appeared first on Crossroads 3D.

]]>
Roll-Bar Mount for sPOD SourceLT 6-Gang Switch Panel
Roll-Bar Mount for sPOD SourceLT 6-Gang Switch Panel - Image 2
Roll-Bar Mount for sPOD SourceLT 6-Gang Switch Panel - Image 3
Roll-Bar Mount for sPOD SourceLT 6-Gang Switch Panel - Image 4
Roll-Bar Mount for sPOD SourceLT 6-Gang Switch Panel - Image 5
Roll-Bar Mount for sPOD SourceLT 6-Gang Switch Panel - Image 6
Roll-Bar Mount for sPOD SourceLT 6-Gang Switch Panel - Image 7
Roll-Bar Mount for sPOD SourceLT 6-Gang Switch Panel - Image 8
Roll-Bar Mount for sPOD SourceLT 6-Gang Switch Panel - Image 9

Roll-Bar Mount for sPOD SourceLT 6-Gang Switch Panel

Price range: $64.95 through $69.95

SKU: PWPsPOD6 Categories: , , , , , , , , Tags: , , , , , , , , , , , , , , , , , ,
This roll-bar-mount is designed for the sPOD SourceLT Modular Universal panel.

  • Convenient location
    Place your switches overhead on the bar. This unit is “ambidextrous:” you can mount your switches over or under the bar, forward, or rearward (toward or away from your face.)
  • No cutting or drilling
    No chopping up of your dash!
  • Easy install
    Installation is simple and uses a Phillips screwdriver.
  • Attractive and Durable
    This switch panel won’t warp in the heat – the material used has similar characteristics as the factory plastic in your machine. This product is professionally 3D printed in ABS.
  • Customizable
    If you need a switch panel for another bar size, or other combination of switches and circle-holes, or any other powered panel type or brand, contact me.

The sPOD SourceLT Universal Switch Panel panel can be purchased here.

Check out the other sizes:

Electronics Not Included

FITMENT: use the guide above to see what size to order. Please measure the diameter of your cross-bar to be certain.
Fits the following side by sides:

  • ARCTIC CAT Wildcat / Wildcat 4: 1.75″
  • CAN-AM Maverick and Maverick 4 seat: 2.0”
  • CAN-AM Maverick X3: 1.85″
  • CAN-AM Commander: 2.0”
  • HONDA Pioneer 1000: 1.75”
  • HONDA Pioneer 700: 1.625”
  • HONDA Pioneer 500: 1.625”
  • HONDA Big Red: 1.625”
  • HONDA Talon: 2″
  • KAWASAKI Teryx / Teryx 4 Top crossbars: 1.7”
  • POLARIS RZR 170: 1.25″
  • POLARIS XP1000 and XP4 1000: 1.75”
  • POLARIS XP Turbo and XP4 Turbo: 1.75”
  • POLARIS RZR 900 2015 and up: 1.75”
  • POLARIS RZR 570: 1.75”
  • YAMAHA YXZ Top crossbars: 1.5”
  • YAMAHA Rhino Top crossbars: 1.5”
  • YAMAHA Viking and Viking 6 seater: 2.0”
  • YAMAHA Wolverine Top crossbars: 1.5”
  • JEEP (many have 2.25″ roll bars)

The post Roll-Bar Mount for sPOD SourceLT 6-Gang Switch Panel appeared first on Crossroads 3D.

]]> https://crossroads3d.com/product/roll-bar-mount-for-spod-sourcelt-6-gang-switch-panel/feed/ 0 Bar Mount for 8-Gang Pre-Wired Switch Panel https://crossroads3d.com/product/bar-mount-for-8-gang-pre-wired-switch-panel/ https://crossroads3d.com/product/bar-mount-for-8-gang-pre-wired-switch-panel/#respond Tue, 04 Jul 2023 19:18:06 +0000 https://crossroads3d.com/?post_type=product&p=13561 This roll-bar-mounted switch panel pairs up with 8-Gang pre-wired switch panels, like the "FXC" or "Nilight" brand panels and others. (available here)

  • Convenient location
    Place your switches overhead on the bar. This unit is "ambidextrous:" you can mount your switches over or under the bar, forward, or rearward (toward or away from your face.)
    Rear-mount option available for when vertical space is a premium
  • Choose "Adhesive Mount" when you need a simple attachment to a flat surface (no bar clamp)
  • No cutting or drilling
    No chopping up of your dash!
  • Easy install
    Installation is simple and uses a Phillips screwdriver.
  • Features
    Optional holes for in-cab down-lighting - choose to have two holes for 10mm-diameter down-lights
    Large side hatch to fit pre-wired kits with large plugs

The post Bar Mount for 8-Gang Pre-Wired Switch Panel appeared first on Crossroads 3D.

]]>
Bar Mount for 8-Gang Pre-Wired Switch Panel
Bar Mount for 8-Gang Pre-Wired Switch Panel - Image 2
Bar Mount for 8-Gang Pre-Wired Switch Panel - Image 3
Bar Mount for 8-Gang Pre-Wired Switch Panel - Image 4
Bar Mount for 8-Gang Pre-Wired Switch Panel - Image 5
Bar Mount for 8-Gang Pre-Wired Switch Panel - Image 6
Bar Mount for 8-Gang Pre-Wired Switch Panel - Image 7
Bar Mount for 8-Gang Pre-Wired Switch Panel - Image 8
Bar Mount for 8-Gang Pre-Wired Switch Panel - Image 9
Bar Mount for 8-Gang Pre-Wired Switch Panel - Image 10

Bar Mount for 8-Gang Pre-Wired Switch Panel

(2 customer reviews)

Price range: $45.95 through $66.95

SKU: PWP-8G Categories: , , , , , , , , Tags: , , , , , , , , , , , , , , , , ,
This roll-bar-mounted switch panel pairs up with 8-Gang pre-wired switch panels, like the “FXC” or “Nilight” brand panels and others. (available here)

  • Convenient location
    Place your switches overhead on the bar. This unit is “ambidextrous:” you can mount your switches over or under the bar, forward, or rearward (toward or away from your face.)
    Rear-mount option available for when vertical space is a premium
  • No cutting or drilling
    No chopping up of your dash!
  • Easy install
    Installation is simple and uses a Phillips screwdriver.
  • Features
    Optional holes for in-cab down-lighting – choose to have two holes for 10mm-diameter down-lights
    Large side hatch to fit pre-wired kits with large plugs

Electronics Not Included

FITMENT: use the guide above to see what size to order. Please measure the diameter of your cross-bar to be certain.
Fits the following side by sides:

  • ARCTIC CAT Wildcat / Wildcat 4: 1.75″
  • CAN-AM Maverick and Maverick 4 seat: 2.0”
  • CAN-AM Maverick X3: 1.85″
  • CAN-AM Commander: 2.0”
  • HONDA Pioneer 1000: 1.75”
  • HONDA Pioneer 700: 1.625”
  • HONDA Pioneer 500: 1.625”
  • HONDA Big Red: 1.625”
  • HONDA Talon: 2″
  • KAWASAKI Teryx / Teryx 4 Top crossbars: 1.7”
  • POLARIS RZR 170: 1.25″
  • POLARIS XP1000 and XP4 1000: 1.75”
  • POLARIS XP Turbo and XP4 Turbo: 1.75”
  • POLARIS RZR 900 2015 and up: 1.75”
  • POLARIS RZR 570: 1.75”
  • YAMAHA YXZ Top crossbars: 1.5”
  • YAMAHA Rhino Top crossbars: 1.5”
  • YAMAHA Viking and Viking 6 seater: 2.0”
  • YAMAHA Wolverine Top crossbars: 1.5”
  • JEEP (many have 2.25″ roll bars)

The post Bar Mount for 8-Gang Pre-Wired Switch Panel appeared first on Crossroads 3D.

]]> https://crossroads3d.com/product/bar-mount-for-8-gang-pre-wired-switch-panel/feed/ 0 Bar Mount for 6-Gang Pre-Wired Switch Panel https://crossroads3d.com/product/bar-mount-for-6-gang-pre-wired-switch-panel/ https://crossroads3d.com/product/bar-mount-for-6-gang-pre-wired-switch-panel/#respond Tue, 04 Jul 2023 19:09:58 +0000 https://crossroads3d.com/?post_type=product&p=13550 This roll-bar-mounted switch panel pairs up with 6-Gang pre-wired switch panels, like the "FXC" or "Nilight" brand panels and others. (available here)

  • Convenient location
    Place your switches overhead on the bar. This unit is "ambidextrous:" you can mount your switches over or under the bar, forward, or rearward (toward or away from your face.)
    Rear-mount option available for when vertical space is a premium
  • No cutting or drilling
    No chopping up of your dash!
  • Easy install
    Installation is simple and uses a Phillips screwdriver.
  • Features
    Optional holes for in-cab down-lighting - choose to have two holes for 10mm-diameter down-lights
  • Large side hatch to fit pre-wired kits with large quick-connect plugs

The post Bar Mount for 6-Gang Pre-Wired Switch Panel appeared first on Crossroads 3D.

]]>
Bar Mount for 6-Gang Pre-Wired Switch Panel
Bar Mount for 6-Gang Pre-Wired Switch Panel - Image 2
Bar Mount for 6-Gang Pre-Wired Switch Panel - Image 3
Bar Mount for 6-Gang Pre-Wired Switch Panel - Image 4
Bar Mount for 6-Gang Pre-Wired Switch Panel - Image 5
Bar Mount for 6-Gang Pre-Wired Switch Panel - Image 6
Bar Mount for 6-Gang Pre-Wired Switch Panel - Image 7
Bar Mount for 6-Gang Pre-Wired Switch Panel - Image 8
Bar Mount for 6-Gang Pre-Wired Switch Panel - Image 9
Bar Mount for 6-Gang Pre-Wired Switch Panel - Image 10
Bar Mount for 6-Gang Pre-Wired Switch Panel - Image 11

Bar Mount for 6-Gang Pre-Wired Switch Panel

$59.95

SKU: PWP-6G Categories: , , , , , , , , Tags: , , , , , , , , , , , , , ,

This roll-bar-mounted switch panel pairs up with 6-Gang pre-wired switch panels, like the “FXC” or “Nilight” brand panels and others. (available here)

  • Convenient location
    Place your switches overhead on the bar. This unit is “ambidextrous:” you can mount your switches over or under the bar, forward, or rearward (toward or away from your face.)
    Rear-mount option available for when vertical space is a premium
  • No cutting or drilling
    No chopping up of your dash!
  • Easy install
    Installation is simple and uses a Phillips screwdriver.
  • Features
    Optional holes for in-cab down-lighting – choose to have two holes for 10mm-diameter down-lights
  • Large side hatch to fit pre-wired kits with large quick-connect plugs

​

Electronics Not Included

FITMENT: use the guide above to see what size to order. Please measure the diameter of your cross-bar to be certain.
Fits the following side by sides:

  • ARCTIC CAT Wildcat / Wildcat 4: 1.75″
  • CAN-AM Maverick and Maverick 4 seat: 2.0”
  • CAN-AM Maverick X3: 1.85″
  • CAN-AM Commander: 2.0”
  • HONDA Pioneer 1000: 1.75”
  • HONDA Pioneer 700: 1.625”
  • HONDA Pioneer 500: 1.625”
  • HONDA Big Red: 1.625”
  • HONDA Talon: 2″
  • KAWASAKI Teryx / Teryx 4 Top crossbars: 1.7”
  • POLARIS RZR 170: 1.25″
  • POLARIS XP1000 and XP4 1000: 1.75”
  • POLARIS XP Turbo and XP4 Turbo: 1.75”
  • POLARIS RZR 900 2015 and up: 1.75”
  • POLARIS RZR 570: 1.75”
  • YAMAHA YXZ Top crossbars: 1.5”
  • YAMAHA Rhino Top crossbars: 1.5”
  • YAMAHA Viking and Viking 6 seater: 2.0”
  • YAMAHA Wolverine Top crossbars: 1.5”
  • JEEP (many have 2.25″ roll bars)

The post Bar Mount for 6-Gang Pre-Wired Switch Panel appeared first on Crossroads 3D.

]]> https://crossroads3d.com/product/bar-mount-for-6-gang-pre-wired-switch-panel/feed/ 0 Under-Seat Storage Box for Honda Pioneer 520, 500 https://crossroads3d.com/product/under-seat-storage-box-for-honda-pioneer-520-500/ https://crossroads3d.com/product/under-seat-storage-box-for-honda-pioneer-520-500/#respond Mon, 20 Mar 2023 17:12:21 +0000 https://crossroads3d.com/?post_type=product&p=12700 Get the weather-resistant under-seat storage box for the Honda Pioneer 500 or 520 to protect your gear from dust and rain. Maximize your in-cab storage with 8 Liters of much-needed cargo space, located under the driver seat. This storage compartment box is designed to keep rain, water, dust, and mud off of your valuables.

  • 26% Cheaper than OEM per liter of storage
  • Fits Honda Pioneer 500 and Pioneer 520, all years, all trims
  • Weather-sealed lid fastens with 4 spring clips
  • Inside storage dimensions: 9" deep x 8 7/8" long x 6 3/4" wide
  • 8L of storage (53% more than OEM)
  • Simple install & removal with six standard push clips
  • 5/16", 8mm, or 9mm drill required for installation (for the 6 push clip holes.)
  • Bottom cap is sealed against moisture

Not designed for protection from complete submersion under water. Replaces OEM part #08L77-HL5-A00

The post Under-Seat Storage Box for Honda Pioneer 520, 500 appeared first on Crossroads 3D.

]]>
Under-Seat Storage Box for Honda Pioneer 520, 500
Under-Seat Storage Box for Honda Pioneer 520, 500 - Image 2
Under-Seat Storage Box for Honda Pioneer 520, 500 - Image 3
Under-Seat Storage Box for Honda Pioneer 520, 500 - Image 4
Under-Seat Storage Box for Honda Pioneer 520, 500 - Image 5
Under-Seat Storage Box for Honda Pioneer 520, 500 - Image 6
Under-Seat Storage Box for Honda Pioneer 520, 500 - Image 7
Under-Seat Storage Box for Honda Pioneer 520, 500 - Image 8

Under-Seat Storage Box for Honda Pioneer 520, 500

(15 customer reviews)

$224.95

Out of stock

SKU: USSP5A Categories: , Tags: , , , , , , , , , ,

NOTE: This large product is made to order, and can take 3-14 days to make.

Get the weather-resistant under-seat storage box for the Honda Pioneer 500 or 520 to protect your gear from dust and rain. Maximize your in-cab storage with 8 Liters of much-needed cargo space, located under the driver seat. This storage compartment box is designed to keep rain, water, dust, and mud off of your valuables.

  • 26% Cheaper than OEM per liter of storage
  • Fits Honda Pioneer 500 and Pioneer 520, all years, all trims
  • Weather-sealed lid fastens with 4 spring clips
  • Inside storage dimensions: 9" deep x 8 7/8" long x 6 3/4" wide
  • 8L of storage (53% more than OEM)
  • Simple install & removal with six standard push clips
  • 5/16", 8mm, or 9mm drill required for installation (for the 6 push clip holes.)
  • Bottom cap is sealed against moisture

Not designed for protection from complete submersion under water. Replaces OEM part #08L77-HL5-A00

Additional information

Weight 63 oz
Dimensions 12 × 12 × 12 in

You may also like…

Related products

The post Under-Seat Storage Box for Honda Pioneer 520, 500 appeared first on Crossroads 3D.

]]> https://crossroads3d.com/product/under-seat-storage-box-for-honda-pioneer-520-500/feed/ 0 Bar Mount for Auxbeam 8 or 6-Gang Switch Panel https://crossroads3d.com/product/bar-mount-for-auxbeam-8-or-6-gang-switch-panel/ https://crossroads3d.com/product/bar-mount-for-auxbeam-8-or-6-gang-switch-panel/#respond Sun, 22 Jan 2023 15:40:33 +0000 https://crossroads3d.com/?post_type=product&p=11981 This bar mount for the popular Auxbeam 8-Gang or 6-Gang powered switch panels gives you a secure, flush-fit mount on any Round bar. Jeep, Honda Pioneer, Polaris RZR, Kawasaki Teryx, Yamaha Wolverine, RMAX, YXZ1000 and others.

  • Convenient location
    Mount your Auxbeam overhead on the bar. This unit is "ambidextrous:" you can mount your switch panel over or under the bar, forward, or rearward (toward or away from your face.)
  • No cutting or drilling
    No chopping up of your dash!
  • Easy install
    Installation is simple and uses a Phillips screwdriver.

Be sure to choose the correct 6-Gang option (for AR-600 or BC60 model Auxbeam panel)
Be sure to choose the correct 8-Gang option(GB80, BB80 GA80, BB80, AR-800 or XL)

Auxbeam Model Fitment:

  • AR-800
  • BA80
  • BB80
  • GB80
  • GA80
  • BC60
  • GC60
  • RA80 XL
  • RB80 XL

The post Bar Mount for Auxbeam 8 or 6-Gang Switch Panel appeared first on Crossroads 3D.

]]>
Bar Mount for Auxbeam 8 or 6-Gang Switch Panel
Bar Mount for Auxbeam 8 or 6-Gang Switch Panel - Image 2
Bar Mount for Auxbeam 8 or 6-Gang Switch Panel - Image 3
Bar Mount for Auxbeam 8 or 6-Gang Switch Panel - Image 4
Bar Mount for Auxbeam 8 or 6-Gang Switch Panel - Image 5
Bar Mount for Auxbeam 8 or 6-Gang Switch Panel - Image 6
Bar Mount for Auxbeam 8 or 6-Gang Switch Panel - Image 7

Bar Mount for Auxbeam 8 or 6-Gang Switch Panel

(5 customer reviews)

$39.95

Electronics Not Included

SKU: PWSAUX8 Categories: , , , , , , , , Tags: , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , ,

  • This bar mount for the popular Auxbeam 8-Gang or 6-Gang powered switch panels gives you a secure, flush-fit mount on any Round bar. Jeep, Honda Pioneer, Polaris RZR, Kawasaki Teryx, Yamaha Wolverine, RMAX, YXZ1000 and others.

    • Convenient location
      Mount your Auxbeam overhead on the bar. This unit is “ambidextrous:” you can mount your switch panel over or under the bar, forward, or rearward (toward or away from your face.)
    • No cutting or drilling
      No chopping up of your dash!
    • Easy install
      Installation is simple and uses a Phillips screwdriver.

    Be sure to choose the correct 6-Gang option (for AR-600 or BC60 model Auxbeam panel)
    Be sure to choose the correct 8-Gang option(GB80, BB80 GA80, BB80 or XL)

    Auxbeam Model Fitment:

    • BA80
    • BB80
    • GB80
    • GA80
    • BC60
    • GC60
    • RA80 XL
    • RB80 XL

Check out my other rocker-switch panels:

Assembly Instruction:

FITMENT: use the guide above to see what size to order. Please measure the diameter of your cross-bar to be certain.

Fits the following side by sides:

  • ARCTIC CAT Wildcat / Wildcat 4: 1.75″
  • CAN-AM Maverick and Maverick 4 seat: 2.0”
  • CAN-AM Maverick X3: 1.85″
  • CAN-AM Commander: 2.0”
  • HONDA Pioneer 1000: 1.75”
  • HONDA Pioneer 700: 1.625”
  • HONDA Pioneer 500: 1.625”
  • HONDA Big Red: 1.625”
  • HONDA Talon: 2″
  • KAWASAKI Teryx 2 & 4 Top crossbars: 1.7”
  • POLARIS RZR 170: 1.25″
  • POLARIS XP1000 and XP4 1000: 1.75”
  • POLARIS XP Turbo and XP4 Turbo: 1.75”
  • POLARIS RZR 900 2015 and up: 1.75”
  • POLARIS RZR 570: 1.75”
  • YAMAHA YXZ Top crossbars: 1.5”
  • YAMAHA Rhino Top crossbars: 1.5”
  • YAMAHA Viking and Viking 6 seater: 2.0”
  • YAMAHA Wolverine Top crossbars: 1.5”
  • JEEP (many have a 2.25″ bar)

The post Bar Mount for Auxbeam 8 or 6-Gang Switch Panel appeared first on Crossroads 3D.

]]> https://crossroads3d.com/product/bar-mount-for-auxbeam-8-or-6-gang-switch-panel/feed/ 0 Pioneer 500/520 Dash Mount for Powered Switch Panel https://crossroads3d.com/product/pioneer-500-520-dash-mount-for-powered-switch-panel/ https://crossroads3d.com/product/pioneer-500-520-dash-mount-for-powered-switch-panel/#respond Sun, 22 Jan 2023 03:38:57 +0000 https://crossroads3d.com/?post_type=product&p=11921 Get the Pioneer 500/520 dash panel mount for the Auxbeam 8-Gang or 6-Gang Powered Switch Panels. Get a clean, factory look with no visible screws, rivets, or bolts.

Includes precision-fit slot for the Auxbeam panel and 1 round slot for USB/Voltage meter. (Auxbeam XL version does not include USB/Voltage meter slot.)

  • Convenient location
    This switch panel replaces the warning plate in your Pioneer 500/520 dash.
  • Easy install
    Cut along the molded line in the dash and snap the plate into place.

Powered Switch Panel not included. You can find them here:
Auxbeam 6-gang switch panel
Auxbeam 8-gang switch panel
Auxbeam XL switch panel

Auxbeam Model Fitment:

  • BA80
  • BB80
  • GB80
  • GA80
  • BC60
  • GC60

The post Pioneer 500/520 Dash Mount for Powered Switch Panel appeared first on Crossroads 3D.

]]>
Pioneer 500/520 Dash Mount for Powered Switch Panel
Pioneer 500/520 Dash Mount for Powered Switch Panel - Image 2
Pioneer 500/520 Dash Mount for Powered Switch Panel - Image 3
Pioneer 500/520 Dash Mount for Powered Switch Panel - Image 4
Pioneer 500/520 Dash Mount for Powered Switch Panel - Image 5
Pioneer 500/520 Dash Mount for Powered Switch Panel - Image 6

Pioneer 500/520 Dash Mount for Powered Switch Panel

(2 customer reviews)

$38.95

SKU: N/A Categories: , Tags: , , , , , , , , , , , , , , , , , , , , ,

FITMENT: Fits Pioneer 500 & 520 (all years). Replaces the right-side dash warning plate.

ELECTRONICS NOT INCLUDED.

Get the Pioneer 500/520 dash panel mount for the Auxbeam or Nilight 8-Gang or 6-Gang Powered Switch Panels. Get a clean, factory look with no visible screws, rivets, or bolts.

Includes precision-fit slot for the Auxbeam or Nilight panel and 1 round slot for USB/Voltage meter. (Auxbeam XL version does not include USB/Voltage meter slot.)

  • Convenient location
    This switch panel replaces the warning plate in your Pioneer 500/520 dash.
  • Easy install
    Cut along the molded line in the dash and snap the plate into place.

Powered Switch Panel not included. You can find them here:
Auxbeam 6-gang switch panel
Auxbeam 8-gang switch panel
Auxbeam XL switch panel
Nilight 6-Gang switch panel
Nilight 8-Gang switch panel

Auxbeam Model Fitment:

  • BA80
  • BB80
  • GB80
  • GA80
  • BC60
  • GC60

The post Pioneer 500/520 Dash Mount for Powered Switch Panel appeared first on Crossroads 3D.

]]> https://crossroads3d.com/product/pioneer-500-520-dash-mount-for-powered-switch-panel/feed/ 0 Bar Mount for Switch-Pros SP9100 https://crossroads3d.com/product/bar-mount-for-switch-pro-sp9100/ https://crossroads3d.com/product/bar-mount-for-switch-pro-sp9100/#respond Sun, 08 Jan 2023 16:53:08 +0000 https://crossroads3d.com/?post_type=product&p=11755 This roll-bar-mounted switch panel holds 3 standard sized rocker switches.

  • Convenient location
    Place your switches overhead on the bar. This unit is "ambidextrous:" you can mount your switches over or under the bar, forward, or rearward (toward or away from your face.)
  • No cutting or drilling
    No chopping up of your dash!
  • Easy install
    Installation is simple and uses a Phillips screwdriver.
  • Attractive and Durable
    The walls are 1/8" thick. This switch panel won't warp in the heat - the material used has similar characteristics as the factory plastic in your machine. This product is 3D printed.
  • Customizable
    If you need a switch panel for another bar size, or other combination of switches and circle-holes, contact me.

The post Bar Mount for Switch-Pros SP9100 appeared first on Crossroads 3D.

]]>
Bar Mount for Switch-Pros SP9100
Bar Mount for Switch-Pros SP9100 - Image 2
Bar Mount for Switch-Pros SP9100 - Image 3
Bar Mount for Switch-Pros SP9100 - Image 4
Bar Mount for Switch-Pros SP9100 - Image 5
Bar Mount for Switch-Pros SP9100 - Image 6
Bar Mount for Switch-Pros SP9100 - Image 7
Bar Mount for Switch-Pros SP9100 - Image 8
Bar Mount for Switch-Pros SP9100 - Image 9

Bar Mount for Switch-Pros SP9100

$44.95

Electronics Not Included

SKU: PWPSP9 Categories: , , , , , , , , Tags: , , , , , , , , , , , , , , , , , ,

This bar mount for the Switch-Pro SP9100 gives you a secure, flush-fit mount on any round bar. 

  • Convenient location
    Mount your SP 9100 overhead on the bar. This unit is “ambidextrous:” you can mount your panel over or under the bar, forward, or rearward (toward or away from your face.)
  • No cutting or drilling
    No chopping up of your dash!
  • Easy install
    Installation is simple and uses a Phillips screwdriver.
  • Attractive and Durable
    The walls are 1/8″ thick. This switch panel won’t warp in the heat – the material used has similar characteristics as the factory plastic in your machine. This product is 3D printed.
  • Customizable
    If you need a switch panel for another bar size, or other combination of switches and circle-holes, contact me.

Check out the other sizes:

Assembly Instruction:

FITMENT: use the guide above to see what size to order. Please measure the diameter of your cross-bar to be certain.

Fits the following side by sides:

  • ARCTIC CAT Wildcat / Wildcat 4: 1.75″
  • CAN-AM Maverick and Maverick 4 seat: 2.0”
  • CAN-AM  averick X3: 1.85″
  • CAN-AM Commander: 2.0”
  • HONDA Pioneer 1000: 1.75”
  • HONDA Pioneer 700: 1.625”
  • HONDA Pioneer 500: 1.625”
  • HONDA Big Red: 1.625”
  • HONDA Talon: 2″
  • KAWASAKI Teryx / Teryx 4 Top crossbars: 1.7”
  • POLARIS RZR 170: 1.25″
  • POLARIS XP1000 and XP4 1000: 1.75”
  • POLARIS XP Turbo and XP4 Turbo: 1.75”
  • POLARIS RZR 900 2015 and up: 1.75”
  • POLARIS RZR 570: 1.75”
  • YAMAHA YXZ Top crossbars: 1.5”
  • YAMAHA Rhino Top crossbars: 1.5”
  • YAMAHA Viking and Viking 6 seater: 2.0”
  • YAMAHA Wolverine Top crossbars: 1.5”
  • JEEP (many have a 2.25″ bar)

The post Bar Mount for Switch-Pros SP9100 appeared first on Crossroads 3D.

]]> https://crossroads3d.com/product/bar-mount-for-switch-pro-sp9100/feed/ 0 Overhead-Mounted Switch Panel, 2-Gang https://crossroads3d.com/product/overhead-mounted-switch-panel-2-gang/ https://crossroads3d.com/product/overhead-mounted-switch-panel-2-gang/#respond Fri, 07 Oct 2022 18:54:23 +0000 https://crossroads3d.com/?post_type=product&p=10980 This roll-bar-mounted switch panel holds 3 standard sized rocker switches.

  • Convenient location
    Place your switches overhead on the bar. This unit is "ambidextrous:" you can mount your switches over or under the bar, forward, or rearward (toward or away from your face.)
  • No cutting or drilling
    No chopping up of your dash!
  • Easy install
    Installation is simple and uses a Phillips screwdriver.
  • Attractive and Durable
    The walls are 1/8" thick. This switch panel won't warp in the heat - the material used has similar characteristics as the factory plastic in your machine. This product is 3D printed.
  • Customizable
    If you need a switch panel for another bar size, or other combination of switches and circle-holes, contact me.

The post Overhead-Mounted Switch Panel, 2-Gang appeared first on Crossroads 3D.

]]>
Overhead-Mounted Switch Panel, 2-Gang
Overhead-Mounted Switch Panel, 2-Gang - Image 2
Overhead-Mounted Switch Panel, 2-Gang - Image 3
Overhead-Mounted Switch Panel, 2-Gang - Image 4
Overhead-Mounted Switch Panel, 2-Gang - Image 5
Overhead-Mounted Switch Panel, 2-Gang - Image 6
Overhead-Mounted Switch Panel, 2-Gang - Image 7
Overhead-Mounted Switch Panel, 2-Gang - Image 8

Overhead-Mounted Switch Panel, 2-Gang

(2 customer reviews)

$29.95

Electronics Not Included

SKU: ROPBX4-1-1 Categories: , , , , , , , , Tags: , , , , , , , , , , , , ,

This roll-bar-mounted switch panel holds 2 standard sized rocker switches.

  • Convenient location
    Place your switches overhead on the bar. This unit is “ambidextrous:” you can mount your switches over or under the bar, forward, or rearward (toward or away from your face.)
  • No cutting or drilling
    No chopping up of your dash!
  • Easy install
    Installation is simple and uses a Phillips screwdriver.
  • Attractive and Durable
    This 2-gang switch box is 2 3/4″ (2.75″ inch) wide. The walls are 1/8″ thick. This switch panel won’t warp in the heat – the material used has similar characteristics as the factory plastic in your machine. This product is 3D printed.
  • Customizable
    If you need a switch panel for another bar size, or other combination of switches and circle-holes, contact me.

I don’t sell electronics, but you can get switches and things on Amazon: SXS Rocker Switches

Check out the other sizes:

Assembly Instruction:

FITMENT: use the guide above to see what size to order. Please measure the diameter of your cross-bar to be certain.

Fits the following side by sides:

  • ARCTIC CAT Wildcat / Wildcat 4: 1.75″
  • CAN-AM Maverick and Maverick 4 seat: 2.0”
  • CAN-AM  averick X3: 1.85″
  • CAN-AM Commander: 2.0”
  • HONDA Pioneer 1000: 1.75”
  • HONDA Pioneer 700: 1.625”
  • HONDA Pioneer 500: 1.625”
  • HONDA Big Red: 1.625”
  • HONDA Talon: 2″
  • KAWASAKI Teryx / Teryx 4 Top crossbars: 1.7”
  • POLARIS RZR 170: 1.25″
  • POLARIS XP1000 and XP4 1000: 1.75”
  • POLARIS XP Turbo and XP4 Turbo: 1.75”
  • POLARIS RZR 900 2015 and up: 1.75”
  • POLARIS RZR 570: 1.75”
  • YAMAHA YXZ Top crossbars: 1.5”
  • YAMAHA Rhino Top crossbars: 1.5”
  • YAMAHA Viking and Viking 6 seater: 2.0”
  • YAMAHA Wolverine Top crossbars: 1.5”
  • JEEP: many 2.25″ roll bars

The post Overhead-Mounted Switch Panel, 2-Gang appeared first on Crossroads 3D.

]]> https://crossroads3d.com/product/overhead-mounted-switch-panel-2-gang/feed/ 0 Overhead-Mounted Switch Panel, 3-Gang https://crossroads3d.com/product/overhead-mounted-switch-panel-3-gang/ https://crossroads3d.com/product/overhead-mounted-switch-panel-3-gang/#respond Wed, 28 Sep 2022 20:57:32 +0000 https://crossroads3d.com/?post_type=product&p=10910 This roll-bar-mounted switch panel holds 3 standard sized rocker switches.

  • Convenient location
    Place your switches overhead on the bar. This unit is "ambidextrous:" you can mount your switches over or under the bar, forward, or rearward (toward or away from your face.)
  • No cutting or drilling
    No chopping up of your dash!
  • Easy install
    Installation is simple and uses a Phillips screwdriver.
  • Attractive and Durable
    The walls are 1/8" thick. This switch panel won't warp in the heat - the material used has similar characteristics as the factory plastic in your machine. This product is 3D printed.
  • Customizable
    If you need a switch panel for another bar size, or other combination of switches and circle-holes, contact me.

The post Overhead-Mounted Switch Panel, 3-Gang appeared first on Crossroads 3D.

]]>
Overhead-Mounted Switch Panel, 3-Gang
Overhead-Mounted Switch Panel, 3-Gang - Image 2
Overhead-Mounted Switch Panel, 3-Gang - Image 3
Overhead-Mounted Switch Panel, 3-Gang - Image 4
Overhead-Mounted Switch Panel, 3-Gang - Image 5
Overhead-Mounted Switch Panel, 3-Gang - Image 6
Overhead-Mounted Switch Panel, 3-Gang - Image 7
Overhead-Mounted Switch Panel, 3-Gang - Image 8

Overhead-Mounted Switch Panel, 3-Gang

(4 customer reviews)

$39.95

Electronics Not Included

SKU: ROPBX4-1 Categories: , , , , , , , , Tags: , , , , , , , , , , , , ,

This roll-bar-mounted switch panel holds 3 standard sized rocker switches.

  • Convenient location
    Place your switches overhead on the bar. This unit is “ambidextrous:” you can mount your switches over or under the bar, forward, or rearward (toward or away from your face.)
  • No cutting or drilling
    No chopping up of your dash!
  • Easy install
    Installation is simple and uses a Phillips screwdriver.
  • Attractive and Durable
    This switch panel box is 3 3/4″ wide (3.75″). The walls are 1/8″ thick. This switch panel won’t warp in the heat – the material used has similar characteristics as the factory plastic in your machine. This product is 3D printed.
  • Customizable
    If you need a switch panel for another bar size, or other combination of switches and circle-holes, contact me.

I don’t sell electronics, but you can get switches and things on Amazon: SXS Rocker Switches

Check out the other sizes:

Assembly Instruction:

FITMENT: use the guide above to see what size to order. Please measure the diameter of your cross-bar to be certain.

Fits the following side by sides:

  • ARCTIC CAT Wildcat / Wildcat 4: 1.75″
  • CAN-AM Maverick and Maverick 4 seat: 2.0”
  • CAN-AM  averick X3: 1.85″
  • CAN-AM Commander: 2.0”
  • HONDA Pioneer 1000: 1.75”
  • HONDA Pioneer 700: 1.625”
  • HONDA Pioneer 500: 1.625”
  • HONDA Big Red: 1.625”
  • HONDA Talon: 2″
  • KAWASAKI Teryx / Teryx 4 Top crossbars: 1.7”
  • POLARIS RZR 170: 1.25″
  • POLARIS XP1000 and XP4 1000: 1.75”
  • POLARIS XP Turbo and XP4 Turbo: 1.75”
  • POLARIS RZR 900 2015 and up: 1.75”
  • POLARIS RZR 570: 1.75”
  • YAMAHA YXZ Top crossbars: 1.5”
  • YAMAHA Rhino Top crossbars: 1.5”
  • YAMAHA Viking and Viking 6 seater: 2.0”
  • YAMAHA Wolverine Top crossbars: 1.5”
  • JEEP (many have a 2.25″ bar)

The post Overhead-Mounted Switch Panel, 3-Gang appeared first on Crossroads 3D.

]]> https://crossroads3d.com/product/overhead-mounted-switch-panel-3-gang/feed/ 0 90-Degree Cab Heater Defroster Vent https://crossroads3d.com/product/cab-heater-defroster-vent/ https://crossroads3d.com/product/cab-heater-defroster-vent/#respond Thu, 22 Sep 2022 20:47:53 +0000 https://crossroads3d.com/?post_type=product&p=10879 This defroster vent hose attachment replaces the one that comes with the "Inferno" brand cab heater for the Honda Pioneer 500 and 520, Yamaha RMAX, and Yamaha Rhino.

  • This vent adds a 90-degree bend to allow the hose to hook up at a better angle.
  • It fits in the passenger or driver side defroster position, and uses the exact same holes and openings as Inferno's vent piece.
  • This vent fits the Yamaha Wolverine, RMAX and Rhino over the glove box and over the steering column for cab heater installations.
  • When installed on the passenger side, allows you to have both a cab heater and a glove box installed.
  • When installed on the driver side, it makes it so that the hose doesn't rub the steering linkage.
  • Choose "Include Louvre" to get the vent exit piece for custom applications.

//// 3D Printed from high-temp ABS
//// DESIGNED AND MADE IN THE USA BY AMERICANS

The post 90-Degree Cab Heater Defroster Vent appeared first on Crossroads 3D.

]]>
90-Degree Cab Heater Defroster Vent
90-Degree Cab Heater Defroster Vent - Image 2
90-Degree Cab Heater Defroster Vent - Image 3
90-Degree Cab Heater Defroster Vent - Image 4
90-Degree Cab Heater Defroster Vent - Image 5
90-Degree Cab Heater Defroster Vent - Image 6
90-Degree Cab Heater Defroster Vent - Image 7
90-Degree Cab Heater Defroster Vent - Image 8
90-Degree Cab Heater Defroster Vent - Image 9

90-Degree Cab Heater Defroster Vent

(4 customer reviews)

Price range: $21.95 through $26.95

SKU: ICHVENT Categories: , , , , Tags: ,

This defroster vent hose attachment replaces the one that comes with the "Inferno" brand cab heater for the Honda Pioneer 500 and 520, Yamaha RMAX, and Yamaha Rhino.

  • This vent adds a 90-degree bend to allow the hose to hook up at a better angle.
  • It fits in the passenger or driver side defroster position, and uses the exact same holes and openings as Inferno's vent piece.
  • This vent fits the Yamaha Wolverine, RMAX and Rhino over the glove box and over the steering column for cab heater installations.
  • When installed on the passenger side, allows you to have both a cab heater and a glove box installed.
  • When installed on the driver side, it makes it so that the hose doesn't rub the steering linkage.
  • Choose "Include Louvre" to get the vent exit piece for custom applications.

//// 3D Printed from high-temp ABS
//// DESIGNED AND MADE IN THE USA BY AMERICANS

Additional information

Weight 5 oz
Dimensions 5 × 3 × 3 in
Include Louvre

Don't Include Louvre, Include Louvre

You may also like…

Related products

The post 90-Degree Cab Heater Defroster Vent appeared first on Crossroads 3D.

]]> https://crossroads3d.com/product/cab-heater-defroster-vent/feed/ 0 QYT KT-8900 Radio Case for Honda Pioneer 5xx https://crossroads3d.com/product/qyt-kt-8900-radio-case-for-honda-pioneer-5xx/ https://crossroads3d.com/product/qyt-kt-8900-radio-case-for-honda-pioneer-5xx/#respond Mon, 21 Mar 2022 21:13:15 +0000 https://crossroads3d.com/?post_type=product&p=9614 Mounts the QYT KT-8900D Radio and USB/Voltmeter to the Pioneer 500 or Pioneer 520.

  • Hinged lid snaps closed to protect the radio face from minor splashing.
  • Radio mounts securely to a tray inside the protective case.
  • Protective case protects the back from water and dust coming from the front-right wheel.
  • Includes all screws and 0.75" port in the rear for wire access.

The post QYT KT-8900 Radio Case for Honda Pioneer 5xx appeared first on Crossroads 3D.

]]> Mounts the QYT KT-8900D Radio and USB/Voltmeter to the Pioneer 500 or Pioneer 520.

  • Hinged lid snaps closed to protect the radio face from minor splashing.
  • Radio mounts securely to a tray inside the protective case.
  • Protective case protects the back from water and dust coming from the front-right wheel.
  • Includes all screws and 0.75″ port in the rear for wire access.

The post QYT KT-8900 Radio Case for Honda Pioneer 5xx appeared first on Crossroads 3D.

]]> https://crossroads3d.com/product/qyt-kt-8900-radio-case-for-honda-pioneer-5xx/feed/ 0 Console Phone Mount for Pioneer 500/520 https://crossroads3d.com/product/console-phone-mount-for-p500-520/ https://crossroads3d.com/product/console-phone-mount-for-p500-520/#respond Sun, 18 Jul 2021 18:01:24 +0000 https://crossroads3d.com/?post_type=product&p=7702
  • Designed specifically for the Pioneer 500 and 520
  • Choose from horizontally or vertically-held phone mount
    • Note: Vertically-held phone may be not fully visible through steering wheel
  • Securely holds small and large cell phones to the dash. Opens up to 3.5" maximum. (If your phone width is narrower than this, it will work for your phone.)
  • Phone mount positions phone behind steering wheel for perfect view while driving
  • Quick and easy installation with Philips screwdriver
  • Made in the USA

    • The post Console Phone Mount for Pioneer 500/520 appeared first on Crossroads 3D.

    ]]>
    Console Phone Mount for Pioneer 500/520
    Console Phone Mount for Pioneer 500/520 - Image 2
    Console Phone Mount for Pioneer 500/520 - Image 3
    Console Phone Mount for Pioneer 500/520 - Image 4
    Console Phone Mount for Pioneer 500/520 - Image 5
    Console Phone Mount for Pioneer 500/520 - Image 6
    Console Phone Mount for Pioneer 500/520 - Image 7

    Console Phone Mount for Pioneer 500/520

    (20 customer reviews)

    Price range: $29.95 through $31.95

    SKU: P5PHNMNT Categories: ,
    • Designed specifically for the Pioneer 500 and 520
    • Choose from horizontally or vertically-held phone mount
      • Note: Vertically-held phone may not be fully visible through steering wheel
    • Securely holds small and large cell phones to the dash. Opens up to 3.5" maximum. (If your phone width is narrower than this, it will work for your phone.)
    • Phone mount positions phone behind steering wheel for perfect view while driving
    • Quick and easy installation with Philips screwdriver
    • Made in the USA

    Additional information

    Weight 6 oz
    Dimensions 4 × 3 × 2 in
    Orientation

    Vertical Phone, Horizontal Phone

    Related products

    The post Console Phone Mount for Pioneer 500/520 appeared first on Crossroads 3D.

    ]]>     https://crossroads3d.com/product/console-phone-mount-for-p500-520/feed/ 0     Panel Clips https://crossroads3d.com/product/sxs-panel-clips/ https://crossroads3d.com/product/sxs-panel-clips/#respond Sat, 10 Jul 2021 23:12:28 +0000 https://crossroads3d.com/?post_type=product&p=7662 Pack of panel clips, 8mm shaft, 15mm head. Fits all Honda SXS and ATV

    The post Panel Clips appeared first on Crossroads 3D.

    ]]>     Pack of panel clips, 8mm shaft, 15mm head.

    The post Panel Clips appeared first on Crossroads 3D.

    ]]>     https://crossroads3d.com/product/sxs-panel-clips/feed/ 0