FITS WolfBox G840, G850 style Camera (match the photos)
The Crossroads 3D Camera mount is precision-designed for the Wolfbox G840, G850 style camera (not included.)

10-degree down angle is a screw mount designed for the Ford Transit High Roof, and has a wire exit underneath the bottom that goes straight down (intended to mount over top of a drilled hole.)

• Mount your Wolfbox camera to any flat surface
• Choose mount type: Screws or automotive molding tape (clean surface before use)
• Mount is precision fit: includes integrated wire channel to run the cord out the back
• Fits the Wolfbox G840, G850 rear camera only.
• Screws and/or tape included
• Designed and Made in the USA by Americans
• Professionally printed in ASA

Direct replacement for the factory seat belt shoulder guides on 1993-2002 Chevrolet Camaro and Pontiac Firebird coupe models (also fits many convertible applications). OEM and reproduction versions are notorious for becoming brittle over time and breaking easily due to age and UV exposure.

This pair is 3D-printed from durable hard rubber material, making them virtually unbreakable under normal use. They maintain the original black color and exact fitment while providing superior longevity—no more cracked or snapped guides.

• Sold as a pair (driver and passenger side)
• Easy direct swap installation
• Matches factory appearance and function
• Ideal upgrade for restored or daily-driven F-bodies

Replaces common part numbers like 16817202 / 16817203 equivalents. Perfect solution for owners tired of fragile plastic reproductions

Wolfbox G900 & G9 Protective Cover Mount – Screw or Adhesive Surface Installation. Designed to mount underneath surfaces, Underbody/Bumper Compatible

Durable protective cover mount for Wolfbox G900 (including Tripro/G930 variants) rear or bumper camera (not included). Shields the camera from rocks, debris, mud, branches, and impacts – ideal for underbody, bumper, or any flat surface mounting in trucks, UTVs, SUVs, or off-road setups.

Key Features:

•  Precision snap-fit protective housing for Wolfbox G900/G9 – secure and vibration-resistant
• Dual install options: Screw mount or strong adhesive tape (automotive-grade, clean surface required)
• Footprint: Needs 2 1/2" inch square flat area
• Protects lens and housing while maintaining camera view and function
• Made from tough, weather/UV-resistant ASA material – built for extreme conditions
• Wire routes out the back
• Professionally 3D printed in the USA
• Designed and made in the USA by Americans

Compatibility: Fits Wolfbox G900, Tripro, G930 series rear/bumper cameras (match photos for exact fit). Universal for flat surfaces – underbody, bumper, frame, or custom spots. Test placement for your vehicle.

Great for off-road protection without permanent mods. Questions on fit or install? Message for details.

Wolfbox G900 Rear Camera High-Mount Pod - 12° degree Down Angle, Sleek Weather Cover

Mount your Wolfbox rear camera high up on flat surfaces like camper roofs, trailer tops, or high-roof van exteriors with this angled adhesive pod. The built-in 12-degree downward tilt provides optimal rear viewing without awkward adjustments—perfect for elevated installations where a level mount would point too high.

• Designed for Wolfbox G900, G900 Pro, G900 Tripro, and similar rear camera models (check photos for match)
• 12° built-in down angle ideal for high placements on campers, travel trailers, fifth wheels, or roof-mounted setups
• Sleek protective cover shields the camera from rain, dust, UV, and road debris for reliable all-weather performance
• Choose from stainless screw or automotive-grade adhesive mounting for secure mounting on metal, fiberglass, or composite surfaces
• Wire exit options: choose bottom cable exit or rear exit when ordering
• Durable, weather-resistant construction holds up in outdoor vehicle environments
• Easy install: snap in camera, install base plate, and install. (Camera NOT included – mount and cover only)
• Proudly designed and made in the USA by Americans

Great for high-roof cargo vans like Ford Transit (including high-roof models), Mercedes-Benz Sprinter (high-roof), Ram ProMaster (high-roof), and similar setups where you need downward-angled rear visibility from elevated positions.

Not sure if it fits your setup? Message me with your vehicle details or a photo—I'll confirm compatibility fast!

Universal Swivel Enclosure Mount for Wolfbox G900 Rear Camera - Adhesive or Screw-Mount, All hardware included

Get flexible, secure positioning for your Wolfbox rear camera with this universal swivel enclosure mount. Perfect for custom placements on dashboards, consoles, windshields, or any flat surface—no drilling required. Industrial-strength 3M adhesive ensures a vibration-resistant hold.
• Universal fit for Wolfbox G900, G900 Pro, G900 Tripro, and any rear camera with the same shape/dimensions (match to listing photos for confirmation)

• Adjustable swivel design lets you dial in the perfect viewing angle for optimal rear visibility
• Durable black ASA material – weather-resistant and built for long-term vehicle use
• Secure enclosure housing protects and snaps your camera in place reliably
• Includes all hardware: industrial-strength 3M VHB adhesive tape, mounting screws if needed
• Large stable base for confident mounting in transit vans, cars, trucks, SUVs, RVs, or trailers
• Proudly designed and made in the USA
• Camera NOT included – mount and hardware only

Ideal upgrade for anyone wanting more robust and protective mounting options than flimsy stock bracket—discreet, adjustable, and tool-free install: clean surface, apply 3M adhesive, adjust swivel, snap in camera. Screw to surface if desired (all fasteners included.)

Unsure on compatibility? Send me your camera model or a photo for verification.

Neatly cover and protect the wire connection or junction point on your Wolfbox rear camera (or similar setups) with this durable clamshell enclosure. Designed to hide splices, plugs, or exposed wiring for a clean, professional look—no exposed connectors or messy tape. Works great for dash cams, backup cameras, electronics projects, or any small wiring cover needs.

• Internal dimensions: 70mm x 10mm (2¾" x ⅜")
• Clamshell design screws closed for secure fit
• Designed to fit the connector of Wolfbox camera cable junctions (or any similar shape/size connector – check photos for reference)
• Universal applications: perfect for protecting dash cam extensions, trailer wiring splices, LED strips, or other low-profile connections
• Made from tough, weather-resistant black ASA material – holds up in vehicles, outdoors, or harsh conditions
• Includes stainless steel screws for secure assembly (no instructions needed – straightforward clamshell design)
• Compact and discreet – keeps your install looking factory-fresh
• Proudly designed and made in the USA
• Camera, wires, or other components NOT included – enclosure only

Simple install: position over the junction, align halves, secure with included screws. Ideal for trucks, cars, RVs, boats, or DIY projects where you want a tidy, protected wiring point.

Wolfbox Rear Camera Pod Mount (Adhesive) - Made in the USA

Secure your Wolfbox rearview mirror dash cam camera on any flat surface with this custom pod mount. No drilling or permanent changes needed – strong automotive-grade adhesive provides a clean, vibration-proof hold that lasts.

• Compatible with popular Wolfbox models including G900, G900 Pro, G900 Tripro, G930, G840, G850, and similar style rear cameras (check the photo to match your camera shape)
• Select your preferred viewing angle from the options shown in photos (choose when adding to cart)
• Secure snap-in fit – camera locks firmly into the pod
• Integrated wire channel neatly routes the power cord up or down, keeping your install tidy
• Generous base size: 6" wide x 2.5" tall for extra stability on windshields and other flat surfaces
• Crafted from durable, weather-resistant ASA material for long-term outdoor use
• Camera NOT included – this is the mount only
• Designed and made in the USA by Crossroads 3D

Ideal for trucks, SUVs, RVs, cars, or any setup where you want a discreet, custom rear camera placement without modifications. Simple install: clean the surface, peel and stick the adhesive, snap in your camera.

Not sure about fit? Message me with your install details.

Universal Adhesive Mount for Wolfbox G900 Rear Camera – Fits Many Cars, Hatchbacks & More
Crossroads 3D adhesive camera housing mount precision-designed for the Wolfbox G900 external rear camera (not included). Ideal for mounting above the rear window or on flat surfaces in hatchbacks, sedans, SUVs, crossovers, and other vehicles where the wire can route a short distance under weatherstripping or trim.

Key Features:

• Strong adhesive backing for secure, no-drill installation on smooth surfaces
• Integrated wire channel for clean rear or front wire exit and routing
• Precision snap-fit holds Wolfbox G900 securely (confirm camera type in photos)
• Easy install: Clean surface, peel adhesive, press on – no tools needed
• Professionally 3D printed in the USA
• Durable ASA material, weather-resistant for automotive use

Compatibility: Universal fit for Wolfbox G900 type rear camera in various applications – works best on vehicles with easy short-distance wire routing (e.g., hatchbacks, liftgates). Not vehicle-specific; Examine pictures and plan placement for your setup.

Great for clean rear view upgrades without permanent mods. Questions on fit or install? Message for details.

Protect your premium Baja Designs LED light pods from rocks, debris, branches, and trail damage without sacrificing style or performance. This durable rubber cover snaps onto the light and provides rugged protection for off-road abuse while maintaining a clean, low-profile look on your S1 or S2 series accessory LED pods.

• Flexible rubber construction — tough against impacts, UV-resistant, and built to last in extreme conditions
• Two versions available — fully closed for maximum protection when lights are not in use, or open-hole design to allow full light output while still protecting the metal pod housing
• Precision fit — engineered specifically for Baja Designs accessory LED pods for a secure, no-slip hold
• Easy on/off installation — no tools required, quick to remove for cleaning or full illumination
• Black finish — complements the factory Baja Designs aesthetic and reduces glare when closed
• Designed and Made in the USA by Americans

[FITS: "cube" style rearview camera (Must match the photos)]
The Crossroads 3D Camera mount is precision-designed to fit common rearview backup/license plate cameras (Example)

The camera snaps into the protective cover securely. Top hole is for camera removal.

• Mount your rearview backup camera to any flat surface
• Choose between adhesive mount or screw mount
• Mount is secure and precision fit: includes integrated wire channel to run the cord out the back
• Fits the displayed camera type only
• All fasteners included
• Top hole is for camera removal
• Designed and Made in the USA by Americans
• Professionally printed in ASA

FITS WolfBox G900 style Camera (match the photos)
The Crossroads 3D Camera mount is precision-designed for the Wolfbox G900 / G930 style camera (not included.)

10-degree down angle is a screw mount designed for the Ford Transit High Roof, and has a wire exit underneath the bottom that goes straight down (intended to mount over top of a drilled hole.)

• Mount your G900 camera to any flat surface
• Choose mount type: Screws or automotive molding tape (clean surface before use)
• Mount is precision fit: includes integrated wire channel to run the cord out the back
• Fits the Wolfbox G900 Tripro rear camera only.
• Screws and/or tape included
• Designed and Made in the USA by Americans
• Professionally printed in ASA

Boost your ventilated seat performance with this custom under-seat air deflector! Redirects cold or hot air from the floor vents straight up into your seat fans for much faster cooling and heating.

• Fits Lexus IS500 2021-2026 – perfect for the V8 F Sport
• Fits Lexus IS350 2021-2026 with ventilated seats
• Fits Lexus IS300 2021-2026 with ventilated seats
• Choose driver side, passenger side, or pair
• Easy 30-second install – just slips into place under the front seat, no tools or mods
• 3D printed in tough ABS plastic in the USA by a family business
• Original Crossroads3D design – not an OEM part, but engineered for perfect airflow
• Made in America by Americans – support small business!

Lexus owners love how this simple upgrade makes cooled seats actually feel cold in summer and heated seats warm up instantly in winter. Works best with floor airflow on. Ships fast from the USA!

The Crossroads 3D Large Water Bottle adapter for Toyota Tundra 2014-2021 is designed to keep large drinks handy in the front cup holders while on the road. It fits into the existing console cup holders and is designed to hold very large water bottles. The adapter is precision-designed for a perfect fit. The Crossroads 3D water bottle adapter is a great way to keep large water bottles (like Nalgene and others,) and is a must-have accessory for any Tundra.

• Precision fit: The Crossroads water bottle adapter fits into the existing console cup holder of the Toyota Tundra (2014-2021). It is designed to hold water bottles with large diameters.
• Large capacity: The adapter can hold water bottles with large capacities, making it perfect for long drives or outdoor activities. Designed for Nalgene (3 5/8" diameter) and larger, 3 3/4" diameter bottles.
• Secure fit: The adapter is designed to securely hold your water bottle in place, preventing it from falling or sliding out of the cup holder.
• Choose the opening diameter (measure your water bottle). Contact me if I don't have your size.
• Easy installation: The adapter is easy to install and requires no tools or modifications. It simply slips into the existing cup holder and can be used immediately.
• Made in the USA: This cup holder adapter is designed and professionally 3D printed in the United States.

/// CHECK PICTURE FOR PROPER INTERIOR ////
[FITS 2021-2025 FORD F150 PICKUPS W/OUT SPRING-LOADED FINGERS IN THE CUP HOLDER]

This is a cup holder delete cover for 2021-2025 Ford F-150 pickups. The purpose is to cover up the rear console cup holders when not in use to protect dogs in the back from getting their paws stuck, or any other reason.

This cup holder delete cover fits into the existing rear console cup holders, and is designed to be durable and fit tightly.

• Precision fit: The Crossroads cup holder delete cover presses into the existing rear console cup holder (Fits style without the spring-loaded fingers)
• Secure: The cover is designed to stay securely in place, preventing it from falling or sliding out.
• Simple installation: The cover is easy to install and requires no tools or modifications to the truck.
• Made in the USA: This cup holder delete cover is professionally designed and 3D printed by Americans in the United States.

/// CHECK PICTURE FOR PROPER INTERIOR ////
[FITS 2011-2016 FORD SUPER DUTY F250, F350, F450 PICKUP]
* Now with stripe color variations. (Black Stripe = no stripe.)

This is a cup holder delete cover for 2011-2016 Ford super Duty F-250, F-350, F-450 pickups. The purpose is to cover up the rear console cup holders when not in use to protect dogs in the back from getting paws stuck, or any other reason.

This cup holder delete cover fits into the existing rear console cup holders, and is designed to be durable and fit tightly.

• Precision fit: The Crossroads dual cup holder delete cover slides into the existing rear console cup holder (must match style in photo).
• Secure: The delete cover is designed to stay securely in place, preventing it from falling or sliding out. Double-sided tape can be added to make it even more permanent.
• Simple installation: The delete cover is easy to install and requires no tools or modifications to the truck. It simply slips into the existing cup holders.
• Made in the USA: This cup holder delete cover is professionally designed and 3D printed by Americans in the United States.

[FITS LEXUS GX460 2010-2013]

Lexus GX460 Cup holder upgrade allows for a more secure tumbler and cup holding by restricting the opening. Press-fit into place for a secure permanent installation without tools. (Replaces OEM center divider.)

Increased grip holds cups & tumblers tightly on the roughest of roads and trails. Strong secure fit. No tools, fasteners, or adhesive needed.

Choose from white, black, tan, or gray stripe.

• Grip: 1.5" inch deep
• Opening: 3 1/8" inch
• Precision fit for Yeti 20oz and 30oz tumblers and other popular brands with tapered bottom
• Does not move, rattle, or pull out when you lift your cup
• Professionally designed and 3D printed in the USA by Americans
• Note: Cover door does not close when installed.

/// CHECK PICTURE FOR PROPER INTERIOR ////
[FITS 2017-2020 FORD F150 PICKUPS]

This is a cup holder delete cover for 2017-2020 Ford F-150 pickups. The purpose is to cover up the rear console cup holders when not in use to protect dogs in the back from getting their paws stuck, or any other reason.

This cup holder delete cover fits into the existing rear console cup holders, and is designed to be durable and fit tightly. (Your truck must have the spring-loaded OEM cup keepers. Interior must match photo.)

• Precision fit: The Crossroads cup holder delete cover snaps into the existing rear console cup holder
• Secure: The delete cover is designed to stay securely in place, preventing it from falling or sliding out.
• Simple installation: The delete cover is easy to install and requires no tools or modifications to the truck. It simply snaps into the existing cup holders.
• Made in the USA: This cup holder delete cover is professionally designed and 3D printed by Americans in the United States.

[FITS LEXUS GX460 2010-2026]
[FITS 4Runner 2010-2024]

Boost your ventilated seat comfort with this custom under-seat air deflector! Designed to redirect hot or cold air from your floor vents directly upward into the seat ventilation fans for faster cooling/heating.

• Fits Toyota 4Runner 2010-2024 (5th gen)
• Fits Lexus GX460 2010-2026
• Increases airflow up into ventilated seats – make sure floor airflow is on for best results!
• Choose driver side, passenger side, or both (pair) when ordering
• Easy install – no modifications needed, drops in place under front seats
• Original design by Crossroads3D – not an OEM part, but engineered for exact fit on these models
• 3D printed in durable ABS plastic right here in the USA by an American family business
• Made in America by Americans

This deflector solves the common issue of weak rear seat airflow in these vehicles. Great upgrade for hotter summers or colder winters. Professional CAD design ensures precise fit and maximum air redirection.